these quick detach mounts..
- Thread starter novan3
- Start date
F22_RaptoR
CGN Ultra frequent flyer
- Location
- Edmonton, Alberta
If I was you, I might try something like an ADM QR mount instead (sold by SOCOM Supply)
Or a GG&G scope ring set (Wolverine should sell them)
as BOTH are adjustable for worn or out of spec rails. Also, both DO NOT have MIM parts.
The problem with ARMS mounts, is that they WILL eventually start to wear out (maybe 50 or 100 open/close cycles... maybe less, maybe more), and once they have worn, your scope will no longer hold zero. There is no way to fix this, once it happens.
They are good for what they were originally designed to be: Emergency "take off" scope rings. ONLY for taking them off in an emergency.
Or a GG&G scope ring set (Wolverine should sell them)
as BOTH are adjustable for worn or out of spec rails. Also, both DO NOT have MIM parts.
The problem with ARMS mounts, is that they WILL eventually start to wear out (maybe 50 or 100 open/close cycles... maybe less, maybe more), and once they have worn, your scope will no longer hold zero. There is no way to fix this, once it happens.
They are good for what they were originally designed to be: Emergency "take off" scope rings. ONLY for taking them off in an emergency.
F22_RaptoR
CGN Ultra frequent flyer
- Location
- Edmonton, Alberta
Despite what people may say, ADM has great customer service also.
I had an ADM Aimpoint mount, and I stripped a thread hole when putting the ring on (completely my fault, from using way too much force).
I emailed them, and asked if they could sell me a new ring half (explained that I stripped it out), and they replied by asking for my address, and sent me a new ring half free of charge
