This Weeks Update for Dlask Arms..

Dlask Arms

Dlask Arms

CGN Ultra frequent flyer
Business Member
Rating - 100%
51   0   0
Location
Delta, BC
So we have just made a new batch of Shorty shotguns, 12.5" & 14" Rem 870 barrels. They just need blueing and are then ready to go. Just got the AR-10 80% lower receivers in. More Kidd stuff is coming. We have been asked numerous times to scallop a design on our CNC 10-22 bolts, these will be ready really soon. Lots'o factory CZ-858 mags will be here within the week. Our CZ custom parts for the SP-01 pistol just came in. These include 11lb. & 13lb. recoil springs, 13lb. main spring / firing pin springs, Stainless steel guide rods and buffers, competition DA/SA hammers, more low profile grips etc. I'm sure there is more but i'm too befuddled to think of it at the moment...

We have also been our creative selves and have a few awesome new projects almost completed. We are really quite excited for these, we know you will be too.


Leigh
Dlask Arms Corp.
 
Outwest1213 said:
What kind of pricing are we talking on the 858 mags?
Click to expand...

Not 100% sure until they arrive and the duties etc. have been paid but should be roughly what they were before, about $85-$95 for a 4-pack. These are mostly new mags, factory CZ which means the best quality. These are almost impossible to find in this condition, even in the States'.

For the Ar-10 80%'s we are also trying to get good deals on the lower parts kits, bolts etc. so it will be much easier to source an almost complete kit and save on shipping etc.



Leigh
Dlask Arms Corp.
 
Dlask Arms said:
Not 100% sure until they arrive and the duties etc. have been paid but should be roughly what they were before, about $85-$95 for a 4-pack. These are mostly new mags, factory CZ which means the best quality. These are almost impossible to find in this condition, even in the States'.

For the Ar-10 80%'s we are also trying to get good deals on the lower parts kits, bolts etc. so it will be much easier to source an almost complete kit and save on shipping etc.



Leigh
Dlask Arms Corp.
Click to expand...

I'll be one of your first customers for this. Might even get a set of those mags too. A complete upper would be a thing of beauty too.
 
If you guys at Dlask are looking for ideas for a new project;

Canada needs Mossberg 500 barrels, in 15.5" configuration, to replace the 18.5" factory barrel.

Something that will bolt onto a standard 5 shot mag-tube,and give a flush fit with the tube.

The barrels should have screw in chokes, a vent rib, and turkey sights.

Believe me when I tell you; There is strong demand for this product.
 
Dexter Morgan said:
If you guys at Dlask are looking for ideas for a new project;

Canada needs Mossberg 500 barrels, in 15.5" configuration, to replace the 18.5" factory barrel.

Something that will bolt onto a standard 5 shot mag-tube,and give a flush fit with the tube.

The barrels should have screw in chokes, a vent rib, and turkey sights.

Believe me when I tell you; There is strong demand for this product.
Click to expand...

THIS. A thousand times THIS!
 
Dlask Arms said:
So we have just made a new batch of Shorty shotguns, 12.5" & 14" Rem 870 barrels.
Click to expand...

Saw the 14" barrel on the site but doesn't mention if these are threaded for chokes or a fixed cylinder choke?

Any info would be greatly appreciated.

Cheers,
D.
 
Dexter Morgan said:
If you guys at Dlask are looking for ideas for a new project;

Canada needs Mossberg 500 barrels, in 15.5" configuration, to replace the 18.5" factory barrel.

Something that will bolt onto a standard 5 shot mag-tube,and give a flush fit with the tube.

The barrels should have screw in chokes, a vent rib, and turkey sights.

Believe me when I tell you; There is strong demand for this product.
Click to expand...

I emailed them about this almost exactly about a year ago. They didn't even bother to reply.
 
dsynk said:
Saw the 14" barrel on the site but doesn't mention if these are threaded for chokes or a fixed cylinder choke?

Any info would be greatly appreciated.

Cheers,
D.
Click to expand...

All of our barrels are cylinder choke. We can thread them for Rem choke if you'd like, cost for it is $95 / barrel to do this.


Leigh
Dlask Arms Corp.
 
juancarlos said:
I emailed them about this almost exactly about a year ago. They didn't even bother to reply.
Click to expand...

Sorry ,but this is a thread about updates, not a thread asking for ideas. There are roughly 10 MILLION gun owners in Canada and many of them have 'ideas' for projects. Don't be offended if we don't answer each and every unsolicited email regarding your particular project idea.


Leigh
Dlask Arms Corp.
 
You must log in or register to reply here.
Back
Top Bottom