Thread Sizes on Sako Actions

[Wookie316]

Can someone please tell me the thread sizes for the following actions:

Sako M995

Sako AV/AIII/L61R

Sako 75/85

Are barrels inter changeable between any of these actions, I know headspace does come into play, I am just wondering about options?

Thanks in advance!

 

[ackleyruger]

I got this from a site online, not everything your looking for but a start.
Sako L-46 = .855 dia X 16"V" TPI X .845 long. Sako L-57 = are
approximately .984 dia X 17 "V" TPI (actually 1.5mm), Sako L-579 = 1.000 dia
X 16 "V" TPI X .897 long. Sako L-61 1.046 (early models 1.000) dia X 16 "V"
TPI.

This is the site
http://groups.google.ca/group/rec.g...83bcfb6c848/159655da02374eda#159655da02374eda

 

[Rembo]

I just pulled the barrel from a Sako AV 270, it measures 1.035 x 16 tpi x .664 long.

Maybe it's 1.046" nominal as mentioned in the above post.......kind of a strange size if you ask me.....however it IS 16 tpi, checked it with my pitch gauges...I could measure it over wires and get the pitch diameter.

I rebarreled a Sako L579 a few years ago, it was 1" x 16 tpi.

 

[Algonquin]

Sako Barrels

Rembo,

I think it's a Whitworth thread which might explain why 16 tpi works. I can go check the references but pretty sure model 75 and earlier exchange.