Tikka 695 bottom metal, any interest?

PR Cook

PR Cook

Regular
Rating - 100%
23   0   0
Location
Whitecourt AB
Good day all. I've had a few requests to make stainless bottom metal for the Tikka 695/595. I'm considering making a small run to test the waters. If anyone if interested, PM me or send me an email.

Regards,
Paul.
 
My 695 was metal (1983 stainless) so wonder when they turned in plastic?
M695 is a thing of the past with recalls with stainless barrels rusting and blowing up to pressure!
Not sure that you've chosen a winner there…
 
Last edited:
Interesting. The mags are steel but I've only seen/heard of plastic bottom metal on them.
Regarding bad stainless, I recollect Sakos and T3s being recalled in the early 2000s for this, I haven't heard that the 695/595 series had had those issues previously. On the contrary guys who own them seem to swear by them and say the T3 was a step backwards.
As far as picking a winner, I agree its an obsolete platform and I don't expect to see huge demand. But there are no options on the market and these are well liked rifles globally. I've had a handful of people ask me about it so I figure I'd raise the question and see who else might be out there.

Regards,
Paul.
 
PR Cook said:
Interesting. The mags are steel but I've only seen/heard of plastic bottom metal on them.
Regarding bad stainless, I recollect Sakos and T3s being recalled in the early 2000s for this, I haven't heard that the 695/595 series had had those issues previously. On the contrary guys who own them seem to swear by them and say the T3 was a step backwards.
As far as picking a winner, I agree its an obsolete platform and I don't expect to see huge demand. But there are no options on the market and these are well liked rifles globally. I've had a handful of people ask me about it so I figure I'd raise the question and see who else might be out there.

Regards,
Paul.
Click to expand...

If you search, pretty sure you will find info on barrels recall or failure.
Let’s do the strip down of my M695 Whitetail:
+ Very sturdy action that last decades.
+ Was coming as a package with scope!
+ Fairly accurate.
+ M695 used market is still bringing very good price because of nostalgic baby boomers!
- Action lug was in raw steel and was rusting inside the plastic stock.
- The stainless steel was micro pit surface rusting even with proper maintenance.
- The owners of the M695 stainless models were never notified by neither the manufacturer or the Canadian distributor at the time of the potential danger of barrel blowout. I’ve learned when I brought my M695 for a firing pin repair to my gunsmith!
- If you think that’s is hard to take a barrel off a T3 action, then you should try out a M695!
 
100y said:
If you search, pretty sure you will find info on barrels recall or failure.
Let’s do the strip down of my M695 Whitetail:
+ Very sturdy action that last decades.
+ Was coming as a package with scope!
+ Fairly accurate.
+ M695 used market is still bringing very good price because of nostalgic baby boomers!
- Action lug was in raw steel and was rusting inside the plastic stock.
- The stainless steel was micro pit surface rusting even with proper maintenance.
- The owners of the M695 stainless models were never notified by neither the manufacturer or the Canadian distributor at the time of the potential danger of barrel blowout. I’ve learned when I brought my M695 for a firing pin repair to my gunsmith!
- If you think that’s is hard to take a barrel off a T3 action, then you should try out a M695!
Click to expand...

M695 came out in the 1990s, so not a Boomer gun. M695 had plastic bottom metal. Maybe you are thinking of the earlier model 65 and 55?
 
PR Cook said:
Good day all. I've had a few requests to make stainless bottom metal for the Tikka 695/595. I'm considering making a small run to test the waters. If anyone if interested, PM me or send me an email.

Regards,
Paul.
Click to expand...

I'm definitely interested in bottom metal if it's not too expensive. I got a very nice metal bolt shroud some years back from a guy who made them up and sold them on CGN - was it you that made those?
 
Last edited:
I would say if you do go ahead, to contact Intersurplus and Great North Gun and see if theyd be interested in carrying these as they often carry these Tikka models
 
PMs sent.
zywina: I'll have to offer a black option for sure. It'll either be blued chromoly or Nitrided stainless. Nitriding is expensive by contrast but would simplify material supply and programming parameters.

Paul.
 
I have a Tikka M595 Master Sporter and I am delighted to see this post! I would definitely love to replace the plastic bottom with a nitrided steel one. Can I get a link or PM with more details?
 
Just an update, We are moving forward on this. I've got a couple 695s here for reference (still on the look out for a 595 or two. if someone has one and are interested in bottom metal shoot me a PM).
Currently working on drawings and dimensions. That side mag release is the crux of it. The lever pin hole is much better suited to a molded part than to machining. I've got a couple ideas though so we'll play with it and see what we come up with.
We wont likely have an end product for a few months as we've still got a shop to run but I'll do my best to keep post updates as we progress!
 
Hey Slimbo, We're just finalizing the design/programing and will be doing a limited run of 695s in the next weeks. Material will be 416ss. PM or email me of you would like one.
 
You must log in or register to reply here.
Back
Top Bottom