Recently I have purchased a used tikka t3 varmint and upon arrival the firing pin is stuck in the cocked position. When removing the bolt for disassembly and inspection the firing pin is seemingly locked back and will not pull tight on an Allen key once the shroud is removed and the firing pin turned back toward the bolt handle. If anyone has any idea how to solve this issue any help would be greatly appreciated! Thanks!! Can send pictures if needed
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an alternative browser.
You should upgrade or use an alternative browser.
Tikka firing pin stuck
- Thread starter pop91
- Start date
This might help:
https://www.youtube.com/watch?v=HVSDEhinBqM
Te instructions for resetting the pin are in the second half of the video. Last time I did this I used a padded vise instead of a screwdriver, but the process is the same.
https://www.youtube.com/watch?v=HVSDEhinBqM
Te instructions for resetting the pin are in the second half of the video. Last time I did this I used a padded vise instead of a screwdriver, but the process is the same.
