Tucker.Grose
Member
- Location
- NW British Columbia
Does anyone have any experience with the Bobsled magazine adapter to single load a T3x?
I have .223 Rem and it is nearly impossible to single load in spite of the T3x having an enlarged port over the T3.
At the range it is nice to single load shells without popping the magazine in and out and constantly loading it.
The diameter of the .223 chamber is so small you can’t just pop a shell in and close the bolt. The tip of the bullet hits the back of the barrel below the chamber hole. On an ‘06/08 or magnum size chamber I don’t see this as a problem, but on .204/.222/223 size chambers it’s a problem.
I have .223 Rem and it is nearly impossible to single load in spite of the T3x having an enlarged port over the T3.
At the range it is nice to single load shells without popping the magazine in and out and constantly loading it.
The diameter of the .223 chamber is so small you can’t just pop a shell in and close the bolt. The tip of the bullet hits the back of the barrel below the chamber hole. On an ‘06/08 or magnum size chamber I don’t see this as a problem, but on .204/.222/223 size chambers it’s a problem.
