Tokarev 9mm barrels and mags

[bobdbldr]

I am very surprised Marstar or Canada Ammo have not grabbed this opportunity to bring these in!
Does anyone in Canada or the U.S. Have these at a reasonable price??

 

[wolf19534]

I've piked up a few conversion kits on EE but you have to be the first to see the ad and act fast otherwise they are gone in minutes

 

[Hitzy]

Mags are not really necessary, the x25 work fine with 9mm rounds. Maybe when the ammo supply dries up it would make sense to get a 9mm barrel. But for now, hard to beat the price of x25.

 

[Teapot]

Mags are not really necessary, the x25 work fine with 9mm rounds.

True in my experience too. A tough pistol made even more versatile.

 

[albayo]

Will the Chinese Tokarev 9mm barrels fit the surplus TT-33 Russian models?
I have had one lying around here and a TT-33 sitting in my cabinet but haven't bothered to try them together.

 

[Hitzy]

Will the Chinese Tokarev 9mm barrels fit the surplus TT-33 Russian models?
I have had one lying around here and a TT-33 sitting in my cabinet but haven't bothered to try them together.

It should drop right in...

 

[Newfoundlandrover]

most of the 9mm barrels being offered are from Chinese Toks.....the barrel is worth more than the entire gun lol!

 

[robin2y]

If you don't use the barrel bushing that came with the 9mm, you may need to open up the tok one a bit...
R

 

[wolf19534]

If you don't use the barrel bushing that came with the 9mm, you may need to open up the tok one a bit...
R

NO....I have seven different types of Tokarev and have not had one yet that the bushing needed to be opened up. Every one from Russian to Hungarian to Tokagypt to chinese to Polish.....never an issue withe the barrel bushing

 

[wolf19534]

most of the 9mm barrels being offered are from Chinese Toks.....the barrel is worth more than the entire gun lol!

Right now if you can find them....New unused 9X19 barrel and two 9mm mags are going for 200.00 to 240.00

 

[Teapot]

The barrel bushing for the 9mm barrel has a larger hole to accommodate the larger diameter of the 9mm barrel.

 

[wolf19534]

The barrel bushing for the 9mm barrel has a larger hole to accommodate the larger diameter of the 9mm barrel.

then why do all of mine work?.....I have never opened the barrel bushings up in diameter.....

 

[robin2y]

Yes...

Pistols purpose built for 9mm have larger diameter barrels, as a general rule. I didn't measure my hungarian barrel; however, chinese one was 0.520 while russian surplus ran a thou or two under a half inch. Recall having to open up a bushing for the T58 barrel though.

Aftermarket "drop-in" barrels are just that, machined to drop right in.

R