Well after some serious cleaning it appears I do have very minimal pitting and staining in the bore,
at first it looked worse then it was but I think most of it was some old dried up cosmo esp up along side the lands
and once cleaned and snaked and picked at a bunch of times it started to crumble and fall out.
and cleaned up pretty decent
I'ved tried m'y polish Tokarev yesterday at the range, on one box of 70 rounds, it jams 1-2 Times at each Mag ....m'y refurbished 1945 works better

Any chance you can try several other mags to see if that solves the issue?
, and the tok was extra clean, same ammo I use for my others Toks.I was thinking the same thing I have 1 matching 1954 and a 1955 with unmatched mag. There is probably a good chance if everyone puts up their mag serial#s we would get at least a few more matches"" and we only need tp send the floor plate not the whole mag!! I have 5 more mags coming too, but the guy said they were restamped which has me wondering, if these are new unissued, then why a restamp!I wonder if we should all list our serial #s, in the hopes that someone has the matching mag for the gun. We could then trade mags.
Any chance you can try several other mags to see if that solves the issue?
Cheers
Jay
P.S. I have not had the chance to hit the range yet, I just got a case of 2280 rounds from Marstar, he he he.
ACK!!! I just opened one of the spam cans of ammo & it's actually 7.62x39!!! Marstar gave me the wrong ammo!!! Oh well, will get it sorted out on Monday... No 7.62x25 ammo in the house yet... Bummer!
Well... crap! I think I may have got the lemon of the batch. The barrel is definitely pitted.
The slide lock doesn't work - I can see where the metal is peened from it slipping - and it didn't get peened like that from my one try at it. If I put the slide stop from my Russian TT in the Polish one it works fine. The Polish one is angled (bent? defective?) out slightly from the slide (the pin isn't exactly 90 degrees from the stop part). Maybe I can put it in a vise and tap it or put a wrench on it to bend it to 90 - not sure if that's a good idea or not. I'm worried that it might just break. Though... what difference does it make? If it breaks I needed a new one anyway. Might try it.
![]()
Any chance you can try several other mags to see if that solves the issue?
Cheers
Jay
P.S. I have not had the chance to hit the range yet, I just got a case of 2280 rounds from Marstar, he he he.
ACK!!! I just opened one of the spam cans of ammo & it's actually 7.62x39!!! Marstar gave me the wrong ammo!!! Oh well, will get it sorted out on Monday... No 7.62x25 ammo in the house yet... Bummer!
Not good. I would not accept it in this condition. I really don't know what is wrong with some people. They accidentally stumble on tones of good publicity and goodwill that others have to work for years to get it, ....and what they do with it....?



happens and there is really no one at fault. I feel confidant that if you contact Kelly's, they'll make it right.jay how are you .i bought one of the toks as well .my son wants to shot pistols so also picked up a norc 1911in 45acp just for a bigger bang. do you think a guy can reload that surplus brass with lead for inside shooting .
i also wonder if i had an autocad program drawn to lazer the bottom clip plate if a guy could stamp the correct serial # to match this pistols .then just swap them munch
Oh god haha atleast we never have enough 7.62x39 ammo in the house
The surplus 7.62x25 anyways come in a big box full of small box that contain 5 slide of 8 bullet. Not a spam can![]()
I have that. The tins look very sturdy. How did you open them?




























