tokarev

[csi]

im looking to find a place to buy 2 new barrels anywhere in canada for a 7.62x25 can anyone direct me

 

[gnmontey]

http://www.tradeexcanada.com/parts/51

M

 

[csi]

thank you

 

[st1264]

Is $95 a lot for a barrel when the whole pistol is $169... or is it just me?

 

[csi]

can anyone tell me if you can get double tapp or buffalo bore 10mm in canada those are the 10 mm magnum loads

 

[Trigger_The_Rookie]

As far as I know the only calibres you can get a TT-33 barrel chambered in are 7.62x25 and 9mm.

 

[st1264]

As far as I know the only calibres you can get a TT-33 barrel chambered in are 7.62x25 and 9mm.

Is there a kit to make a Russian 7.62x25 into a 9mm?

 

[Trigger_The_Rookie]

Norinco produces a 9mm TT-33. To convert requires only a barrel and a barrel bushing

 

[wolf19534]

don't forget the Tokagypt.....comes with both barrels.....no barrel bushing required for change over......

 

[wolf19534]

Is there a kit to make a Russian 7.62x25 into a 9mm?

no bushing required other than the one u already have....just pick up a Tokarev 9mm barrel

 

[st1264]

no bushing required other than the one u already have....just pick up a Tokarev 9mm barrel

A barrel and magazine then... where would I find those if I was interested?

 

[Trigger_The_Rookie]

I believe Lever in BC has Tok mags at a decent price (which incidentally will hold both 9mm and 7.62x25 without modification).

The 7x25 is slightly longer, so there is no reverse compatibility (IE I can't chamber my JR carbine for 7.62x25 and use Glock mags.) Dang...