TOZ-17 Bolt Disassembly Help !

[Fred24]

Hi guys ! I need to disassemble a Russian TOZ-17 Bolt and have no clue how to do it. I found almost nothing on the web. Can some TOZ expert help me here ?


Here's the bolt : http://cdn2.armslist.com/sites/armslist/uploads/posts/2013/05/16/1625843_02_original_1955_56_toz_17_russia_640.jpg




Thanks

 

[mkrainc]

It's been awhile since I took mine apart to change the firing pin, but if I remember correctly it begins with pushing a couple of pins out. Careful because the spring on the firing pin is fairly strong.

I will have a look at my bolt and see if I can remember what I did to r&r my bolt. Stay tuned. (btw I'm not an expert)

 

[mkrainc]

It all starts with punching out the pin pointed out in the first picture. As you can see by the picture of the firing pin, the back half of the bolt un-threads off the firing pin. The bolt handle section slides off, revealing another pin that goes through the slot on the firing pin.

I do remember that it wasn't an easy job. almost needed three arms. Hope this helps you out some.

 

[Fred24]

It all starts with punching out the pin pointed out in the first picture. As you can see by the picture of the firing pin, the back half of the bolt un-threads off the firing pin. The bolt handle section slides off, revealing another pin that goes through the slot on the firing pin.

I do remember that it wasn't an easy job. almost needed three arms. Hope this helps you out some.

Thanks very much for your help sir ! !

 

[mkrainc]

Happy to help.