TOZ 8M trigger

[danyboy]

Has anyone ever made or found a replacement trigger for this model ?

 

[OkayShooter]

I put a shim under the spring and moly greased the area the trigger/sear rode on. Doubt anyone bothered making a trigger for them.

 

[MRP]

I did the same in my TOZ 17. Because it was designed as a cadet rifle they gave it the standard 2 stage trigger. Shim under the spring, be careful it takes a bit of testing to get the exact thickness. A small elastic around the trigger and the block just enough to take up the slack in the trigger, been keeping a look out for a spring that would do the trick but haven’t found one.

 

[danyboy]

Thanks guys, turned out my new stock wasn't carved right near the trigger assembly. Everything works out good, trigger is smooth with a little over 1 pound. Here are pictures of new stock I made out of walnut.

 

[Rod B]

That's a really nice looking stock.

 

[MRP]

There’s no TOZs in the 50 yard and 100 yard challenge list in the rim fire forum, hopefully you can fix that.

 

[danyboy]

I plan to. I think with a good scope and good ammo, this rifle should perform good. Will try to remember posting shooting results here.

 

[danyboy]

That's a really nice looking stock.

Thanks