Trade Ex Military Surplus Mystery Box #2

[CanadianAR]

#8 is the lock for a Mauser 98 bolt shroud. 10 looks like a Mauser buttplate. #11 a band retainer from a Mauser with split band springs. #18 looks like p38 magazine guys.

 

[maple_leaf_eh]

#12 sort of looks like an M1 carbine sear. But with the angle that it sits, and shadow, I can't be sure.

No, you're right about the shadow. It has a grooved surface on the rounded portion. My first identification is a magazine release which would be form fitted into a trigger guard.

IMGUR is a good photo host that doesn't seem to bog down, so I'll repost with more photos of smaller groups and tentative IDs. Thanks to everyone so far.

 

[gaff]

12 is the floor plate release , commercial k98 mag box .
They have complete ones on the site . Possibly Santa Barbra or Parker Hale

 

[Dave in Calgary]

Agree on #18 being the internals from a P38 magazine.

 

[gewehr76]

P 38 mag springs have upper most coil half way shorter than the rest of the coils. It is not p38 mag spring. Follower is not correct either.
#11 is mosin nagant rear band retainer spring by the way.

 

[Mk VII]

14 appears to be Mosin cleaning kit parts.

 

[maple_leaf_eh]

1 long spring - unknown
2 short spring - maybe Swedish Mauser firing pin spring
3 cleaning brush - unknown
4 unk
5 spring wire contraption
6 inspection mirror - chamber inspection mirror from a tool/cleaning kit. Maybe Swiss?
7 stock cross bolt - a) maybe a M98 recoil lug
b) maybe Moisin
8 small pin
9 Danish Anti-tank rocket/gun sight base - ID'd from TradeEx website
10 stamped butt plate - a) maybe Mauser 98
b)K-31
11 stock band spring - a) maybe a band spring from a VZ-24
b) a band retainer from a Mauser with split band springs
c) Mosin Nagant rear band retainer spring
12 magazine release - floor plate release , commercial k98 mag box
13 Mauser bolt shroud - maybe ejector/bolt stop probably from a Turkish 1903 or similar action
14 SKS or Moisin cleaning tools
15 hollow post - maybe rear pillar tube from a M98
16 cleaning patch jag
17 unknown - maybe Swedish Mauser barrel band spring
18 magazine spring, follower, floor plate and plate - not P38
19 plastic floor plate

 

[gewehr76]

26 looks like 80's era yougoslavian tooth brush.
6 is definitely swiss rifle bore inspection mirror.

 

[maple_leaf_eh]

26 looks like 80's era yugoslavian tooth brush.
6 is definitely swiss rifle bore inspection mirror.

I've been to that part of the world "on business", and you are partially right. Dental care was not a priority for some people.

 

[gaff]

If you fellas were real gun nuts you would know , tooth brushes are for cleaning AKs .in Yugo .

 

[Dave in Calgary]

Or perhaps that is the tool provided by the drill instructor to new recruits to clean out the toilets.

 

[gewehr76]

No one disputing tooth brush usefulness in cleaning firearms. But that particular brush looks like 80's era tooth brush to me. It may not even be yougo. I bet it also has non synthetic bristles. I mean, lol we need close up pictures of the brush to id it now.

 

[Philthy1]

Looks like they are sold out. Hopefully made room for some more guns

 

[Dave in Calgary]

#19 appears to be the base plate for a Tokagypt 58 pistol magazine. 7 round single stack 9mm parabellum.

 

[woodchopper]

18 might be a HiPower mag spring.