Troy Build - Where to start???

[RobHL]

Hey guys, long time lurker (specifically the 10/22 picture threads haha). I've been tossing the idea back and forth of getting another .22 or an m305 and I think from an economical shooting standpoint, the ruger 10/22 just won out. I get far more range time with my current .22 than I do with any of my other rifles and I'm looking for a project so I've decided on the ruger.

Specifically I'm looking at upgrading (alot) and slapping it in a Troy (T22?) chassis. My question to those who have more experience in the ruger realm than I - Where do I start? What model 10/22 would be a good starting point? Essentially everything will be upgraded at some point, so maybe it's a pointless question, however those upgrades wont happen overnight. I want something relatively good out of the box that I can slap into the Troy chassis until more funds come along. I'm not particularly well versed when it comes to the 10/22 scene, so any advice would be helpful. Thanks very much for reading!

 

[G.Mitchell]

If you're going to change out most all the parts I'd start with the cheapest base 10/22 you can find.

Most all of them will need fit and finish work to get them where they out to be.

If you plan to run a 16" barrel maybe find one without the standard front sight so you can use the stock barrel with the Troy chassis. The Tactical version has a 16" barrel with a muzzle device and no iron sights. I think that would be a good model to start with.

 

[RobHL]

I figured as much. From what I've seen, changing out the majority of components seems to yield the best gains - or at least provide the biggest project.

First step seems to be finding the Troy chassis. Looks like most places are out of stock... might end up with a different stock to begin with..

 

[Sakoman .308]

The Nordic Components Kits are interesting too.
If I were going to replace most things in a build, I would search for the cheapest ruger 10/22 I could find.
I would check out youtube videos on modifying the bolt release.
Other vids show polishing & stoning the trigger components for a better trigger pull.
Many people drill a hole at the back of the receiver to allow a cleaning rod to be used from the back.
You can also polish the bolt where it contacts inside the receiver.
There is often overspray inside receivers, this can be sanded (scotchbrited) smooth.

You tube has a lot of information. You may even get some modifying tricks from others at the range who have been down the road before you. ( Just make sure they have the time to talk to you. Some people only have time to shoot at the range.)
To me the most Important things to do to a 10/22 are buy a KIDD barrel, and get a trigger job done, or do one yourself.
The barrels are made by Lothar Walther of Germany and finished by KIDD. They are excellent.

 

[awesomealvin]

I own 3 10/22's and never regret any of them. If I can start it all over again I would do one of the following.

1. Buy a Dlask DAR-22 $699 with sporter barrel. Other than the trigger, everything is top of the line. If you don't like any of the components (such as the Hogue Stock or barrel) sell it, you can get decent money for the components. Plus it's Made in Canada.
2. Wait for the Dlask TUF-22 $750ish. Once it comes out, it would be the only 10/22 platform that can legally run 25 round mags. Again swap and sell what you don't like...and it's also Made in Canada.
3. Wait for the T/C R22 $550ish. Looks to me like a $1000 gun with a $500 price tag. Swap and sell what you don't like.
4. Buy this $370 --> https://www.theammosource.com/store/index.php?main_page=product_info&cPath=2_25_82&products_id=8796 Comes with a case and passable scope for plinking. Best bang for your buck imo. Make sure you swap out the Bolt Buffer Pin!

Hope that helps.

 

[RobHL]

Sakoman, I hadn't actually looked into the Nordic kits until you mentioned them. Of course, somehow it worked out that right as I started looking I found a Troy Industries in stock Haha. Thanks for all the tips to looks for. I have been hearing alot of good things about the KIDD barrels, itll definitely be one of the first upgrades.

$370 isn't a bad price for that at all. Considering I'm looking at cabelas and a bare bones carbine is that price. It's just waiting for it to arrive lol. Maybe that's half the fun?

What's the deal with the bolt buffer pin? Excuse my ignorance.

 

[awesomealvin]

Sakoman, I hadn't actually looked into the Nordic kits until you mentioned them. Of course, somehow it worked out that right as I started looking I found a Troy Industries in stock Haha. Thanks for all the tips to looks for. I have been hearing alot of good things about the KIDD barrels, itll definitely be one of the first upgrades.

$370 isn't a bad price for that at all. Considering I'm looking at cabelas and a bare bones carbine is that price. It's just waiting for it to arrive lol. Maybe that's half the fun?

What's the deal with the bolt buffer pin? Excuse my ignorance.

The stock Bolt Buffer Pin is steel fitted inside an aluminum receiver. It not only makes the action cycle very loud but slowly wear down the aluminum receiver. A rubber/polymer buffer pin solves that problem. It's a $5 part and a 5 min install.

 

[RobHL]

The stock Bolt Buffer Pin is steel fitted inside an aluminum receiver. It not only makes the action cycle very loud but slowly wear down the aluminum receiver. A rubber/polymer buffer pin solves that problem. It's a $5 part and a 5 min install.

Thanks for clearing that up! I'll add it to the list.