Tttttttttttthhhhhhhhhh#########

[140mile]

Thx






Thx for all the strate up answers,nice, not to get a bunch a flack,over a simple question!!!

 

[0faustus0]

SAAMI max pressures for 12ga 2 3/4" and 12ga 3" are the same ... so pressure wise, she should be bale to handle it.

http://www.shotgunlife.com/shotguns/tom-roster/important-information-about-shotshell-pressures.html

 

[dogzilla]

It is literally the same frame. Only difference is the ejector and ejector spring. You can often replace the ejector spring and relieve the ejector with a dremel without replacing the rivets and shoot 3". Once you know what you're doing it's about a 20 minute job or less

 

[McHoss]

I was curious about this as well. So my 2 3/4" Wingmaster could be made to shoot 3" shells. Assuming I had a compatible barrel and did the ejector work.

 

[dutchhunter]

Right thy have rhetoric same size port for the shells and most internals are the same

 

[blasted_saber]

Mine cycles 3" shells fine without any modifications whatsoever. Apparently there are a couple model years where this is the case.

Assuming you have a 3" barrel of course.

 

[140mile]

McHoss,your avatar picture is priceless!

 

[McHoss]

McHoss,your avatar picture is priceless!

I happen to look an awful lot like Dan Blocker (Hoss) and I ride motocross, so when a friend found that, he had to send it.