Tuning a Magwedge/sks mag adapter

migrant hunter

migrant hunter

CGN Ultra frequent flyer
Rating - 100%
181   0   0
Location
Southern Alberta
I bought a magwedge AR magadapter on the EE, managed to fit it in the last couple of days and just made it out tonight before dark with 30 rds.
The first 4 rounds out of my XCR-L mags are presenting too low and hitting under the barrel at 6 0'clock.
The last six rounds feed slicker than snot. Anyone have this issue, do I need to play with the angle of the adapter, or have I not removed enough metal from the reciever? The mags click into place and drop free, and I'm loathe to start messing with the feed lips.
What say ye?
 
I too am having issues. I've removed enough from the receiver and the bolt hold open. mags insert, lock and drop free nicely. The feeding problems vary. Rounds coming off the mags either go up into the chamber at too high an angle and jam up the bolt not allowing it to close or the bolt won't catch the back of the case On the way forward and just ride right over the Round and not chamber it. Have 2 mags and they both seem to do it. Not sure if it's the mags or More mods needed but it's pretty frustrating not being able to get through a mag without a stoppage.
 
supahdave said:
I too am having issues. I've removed enough from the receiver and the bolt hold open. mags insert, lock and drop free nicely. The feeding problems vary. Rounds coming off the mags either go up into the chamber at too high an angle and jam up the bolt not allowing it to close or the bolt won't catch the back of the case On the way forward and just ride right over the Round and not chamber it. Have 2 mags and they both seem to do it. Not sure if it's the mags or More mods needed but it's pretty frustrating not being able to get through a mag without a stoppage.
Click to expand...

It might just be a tab adjustment issue. I will pm you with my number and we can talk ...
 
You must log in or register to reply here.
Back
Top Bottom