Ultimate 6.8SPC/300BLK/7.62 Black Rifles

LWRC 6.8SPC
Upper: LRWC PSD 8.5" 6.8SPC
• AAC Blackout brake, Gear Sector QD mount/hand stop
• LWRC BCG/bolt, PRI GasBuster charging handle, Surefire X400
• Troy M4 BUIS, Elcan Spectre DR (rare SOCOM reticle)
Lower: LWRC M6
• Magpul UBR stock w/enhanced pad, MOE+ grip, Extended mag release
• Geissele SSA trigger, BAD A.S.S. 45° selector, BAD lever, KNS pins
• Enidine hydraulic buffer, LWRC spring, buffer pad, anti-twang
Weight: 9.19lbs (as configured with empty magazine)

ultimate68spc.jpg
 
Last edited:
I could post mine 7.62X39, but I really didn't build it, heck I didn't even put Loctite on it like I am supposed to. :p

Without any more pics these thread would really suck, so here is my entry.
Dlask 7.62 X 39 upper with 16" stainless steel barrel on a Stag lower with Wolffe extra power hammer spring.

762X39.jpg
 
Last edited:
Dohhunter said:
Blax, how do you like the UBR on a PDW size outfit?
Click to expand...

Really good, actually. It's about 0.5lbs heavier than a standard setup with a CTR, but the extra weight helps balance out the heavier barrel and piston system. It looks longer, but there's only a 0.4" difference between a CTR and the UBR - and I find that's enough in the collapsed position to give me a perfect LOP. It also has a really comfortable and natural cheek weld. I prefer the storage panels removed as it makes it easier to adjust like a traditional stock.
 
Suputin said:
Now why would you want to make all that noise when there is no need to? Why burn 45gr of powder when 18gr will do nicely? It is just uncivilized to make all that noise.
Click to expand...

The same reason a 4 cyl car is s**t. ;)

e173b547.jpg


And 2 other projects on the go: Armalite SASS upper less a barrel with SOCOM 7.62 lower and what was a Valmet Hunter.
4cd1c793.jpg


Big noise & Big holes
 
fireball said:
The same reason a 4 cyl car is s**t. ;)

e173b547.jpg


And 2 other projects on the go: Armalite SASS upper less a barrel with SOCOM 7.62 lower and what was a Valmet Hunter.
4cd1c793.jpg


Big noise & Big holes
Click to expand...
WoW!
That is some #### fireball!
But I think mine are atleast if not better cause they are complete :owned:
Now get back to work and fix that front handguard :p
 
I'll play. Here is a 6.8 build I just finished. The PWS brake will be changed out for a SE Vortex soon. This is MY idea of a PDW!
IMG_0738.jpg

Noveske Stripped upper
Noveske stainless 7.5" barrel
Noveske gas block and tube
LMT FA BCG
Troy TRX
BCM charging handle
Troy BUIS
Noveske Gen 2 stripped lower
Stag LPK
Magpul UBR
KNS pins
Norgen ambi mag release
Barret 5/30 6.8 mags
Topped with an Aimpoint T1 micro and Larue LT660

PWS 7.62x39
IMG_0743.jpg

Not really a build, I just dressed her up the way I like.

And a 300 BLK build I just finished as well.
IMG_0740.jpg

IMG_0742.jpg

Complete factory Noveske upper with a BCM charging handle
Troy BUIS
Noveske stripped Gen 1 lower
Stag LPK
Phase 5 Tactical ambi bolt release
Magpul UBR
KNS pins
Troy vert grip
Magpul aluminum trigger guard
Topped with a FDE Eotech
 
You must log in or register to reply here.
Back
Top Bottom