Upgrading my Rem 700P- Some Questions

The HS system AND 10 round mag are as easy as pie to get in Canada. Just order it from a dealer. Just got two for my Remington 700 VTR's (in 308).

The system comes with one small mag, but I wanted the 10 rounders. It costs about $500.00 for the system and about $200.00 for the 10 round magazine.

FYI you can order the bottom metal with a 10 round mag only, you don't need to get both. It cost me $500 for metal and mag...
 
Well, I'm just over half done what my original plan evolved into.
I've got an HS Precision PST007 stock on order from Wolverine that will allow me to keep the palm swell I like on my current HS stock, yet add the adjustable LOP, cheek riser and the fore end rail.
P&D set me up with a Leupold Mark 4 4.5-14X 40 LR/T Target scope, but upgraded by Korth with the M1 turrets.
A friend gave me a set of Badger rings and Badger 20 MOA base.
I still have the Tactical Intervention sling I got from One Shot Tactical many years ago.
The latest part of my project was just completed by Wallbanger here on the board. That being, the upgrading of my bolt with a Badger knob. I knew that I wanted the knob to be Badger, so when I got it installed in record time (just a few days including shipping both ways) and at a very good price that beat everything else I saw, I was very happy.
Anyways here are the pics so far:

DSC00591.jpg


DSC00589.jpg


And the before and after of the Badger knob:
DSC00585.jpg


DSC00593.jpg


All that is left now is the stock that is expected around the end of October, and then replacing the bottom metal. I would have preferred to stick to the Badger plan, but that's looking less and less likely due to availability.
 
Back
Top Bottom