Upgrading the extractor on 2 different guns

[rubberdown]

So I have a Ruger SR-22 and want to put in the VOLQUARTSEN Exact Edge Extractor and was thinking while I'm at it, why not put one into my Mark III Pistol at the same time. Problem is that on Brownells site, they have 1 listed for the 10/22 and a different one that comes with a firing pin for the mark III, I only want the extractor though.

Now below is an extractor that covers both models I want to work on, so would that mean if I got the Volquartsen for the SR-22 that it would also work on my Mark III

Heres the one that covers both guns I want to upgrade, but its not the Volquartsen extractor....

RUGER® MARK I/II/III™, 22/45™, & 10/22® HEAVY DUTY EXTRACTOR
Mfr:TACTICAL SOLUTIONS, LLC

Thanks for your assistance

 

[rubberdown]

I found this picture, when you click on it, it says it covers the pistols too, but non of the actual descriptions say it fits the pistols,

https://www.volquartsen.com/products/163-exact-edge-extractor-for-10-22-and-10-22-magnum

For a measly $12 each it wont kill me to get 2 of them and try them out I guess.

 

[Jahred.F]

If memory serves me, they are one and the same. The spring is different though.