Valtro PM5...

[maw]

Where can I find one in Canada? Specifically looking for the "Pistol Grip Shotgun With Muzzle Brake and Rear Sight". Here is it...

 

[CJacob]

http://www.frontiertaxidermy.com/html/tactical_shotguns.html

One of the dealers up top.

 

[maw]

thanks for interneting for me! My googling was of no success or reading old posts on this site with keyword 'valtro pm5'.

Interestingly, FrontierTaxidermy is showing the Mag fed grizzly as 3" where CANAM says it is 2 3/4" ... who is right?

 

[Undergiver]

it's 3 "

 

[Shrek]

Last time I was at Del Selins in Vernon he had one.....I think he could order them in as well.

 

[maw]

Undergiver, so CanadaAmmo is marketing their own shotgun incorrectly? Hm.

Shrek, thanks I will look into it.

 

[Undergiver]

CanadaAmmo is not selling them, I think your looking at their Grizzly's, mag fed 870 clones which are 2-3/4 chambered.

 

[maw]

Undergiver: CanadaAmmo is not selling them, I think your looking at their Grizzly's, mag fed 870 clones which are 2-3/4 chambered.

We're talking about the same thing. The discussion just drifted from the topic of the original post. I said: "Interestingly, FrontierTaxidermy is showing the Mag fed grizzly as 3" where CANAM says it is 2 3/4" ... who is right?"

Maybe this is more clear... "FrontierTaxidermy is selling the mag fed Dominion Arms Grizzly 15". However, they're listing the firearm as accepting 3" shells. Whereas, CanadaAmmo is listing the mag fed Dominion Arms Grizzly as 2 3/4". Who is correct?"

I was pointing out a key feature difference for the Dominion Arms Grizzly. This had nothing to do with original topic, but something I noticed about the referred dealer, which was mentioned. Since CanadaAmmo == Dominion Arms(or has a tight relationship with them) I guess Frontier has their facts wrong. Also, it is funny that Frontier is using the same picture of the Grizzlys as CanadaAmmo.

Just food for thought when you want to do some business with a company for the first time...

 

[Hotwheels81]

Last time I was at Del Selins in Vernon he had one.....I think he could order them in as well.

ya i recall seeing he has a 14" NIB on the EE, the one in the above pic is the 17-18"? ported, mine is just like that one minus the porting and i have a rifle sight on the front... good smith at Del's... he put a folder on a buddy's PM5 and it look's top notch

 

[Mikjk]

the one above is a 20" barrel... only came 14" and 20" barrels.

 

[Eddie Honda]

The box-fed Grizzly is chambered in 3" (although it says 2 3/4 on the barrel). I checked with CanAm.

The 3" inch shells are a little too long though, and they tend to get hung up in the feeding path. That's why it's advertised as a 2 3/4" shotgun. You can make the 3" shells feed better with a little modification to the gun, but I'd go with the Valtro if you want to use 3" shells.

 

[Hotwheels81]

the one above is a 20" barrel... only came 14" and 20" barrels.

well then here's another discrepency for you.... frontiers site says 14" and 18".... http://www.frontiertaxidermy.com/html/tactical_shotguns.html

 

[Nisser17]

The ported barrel models with factory ghost rings are PM5-combat.These were made for civilian use. The non ported ones that come with mossberg ghost rings are PM2's that are made for Military and LE only as well as the 10 round PM3 semi's.
That's what The rundown I was told. If you are lucky enough to have a PM2 I was told to hold on to it.

 

[Hotwheels81]

The ported barrel models with factory ghost rings are PM5-combat.These were made for civilian use. The non ported ones that come with mossberg ghost rings are PM2's that are made for Military and LE only as well as the 10 round PM3 semi's.
That's what The rundown I was told. If you are lucky enough to have a PM2 I was told to hold on to it.

well lucky me...