Value of Norinco HP9-1 stock set?

[sixty9santa]

Hi all,
I would like to know the value of brand new fresh take off of a Norinco HP9-1 stock set?
Much thanks,

-sixty9santa

 

[canucklehead]

I would guess $50 for stock and forend. I was actually suprised how well made the HP9 furniture actually is!

But in the end, it's still Norinco, and isn't as 'good' as a 870 set.

 

[Claven2]

That's generous, I wouldn;t pay more than $20. You can get a REAL replacement Remington set for under $50.

 

[jeepingpw]

I just put a Norc butt on the kids 870 as we had cut down the original stock while he was small.
Heres what I found.
The stock bolt is shorter on the Norc & a smaller/different thread.
I used the Rem bolt, but had to put a spacer about 1 1/2 long (approx) on the Rem bolt.

 

[Claven2]

Jeepingpw: Is it possible the length issue is because you used a wood stock bolt to install a synth butt? I think the synth bolts are shorter. If the threads are different, however, then you are stuck with the Norc bolt. Not a problem really, but worthy of note.

 

[SignGuy]

rem bolts are threaded SAE and norc bolts are threaded metric i believe