video sks problem need help

impact.ca

impact.ca

Regular
Rating - 100%
1   0   0
Location
somewhere on hwy 97 between Kelowna and Penticton
http://www.youtube.com/watch?v=yeRnm0NqXTk

HELP!!! my norinco is sick!and dirty,
mthe "flappy thing"below the rounds keeps getting caught above the stopper so I can only load 1 rd,:( I have to push the Baseplate? down with a screwdriver, Do i need to replace something?

Ive had 2 cases through it and its been well neglected, by me:) but if there is something I can adjust
or replace with out going to a smith,that would be awesome.

Nutnfancy help me sir:)

Thanks you for watching,
Please comment and send me tips or hints for my videos
Video responses with your videos are welcomed
 
Is it a new issue? Never seen that before, but it seems like a fairly simple mechanism. How about just filling her down a bit?

Love the youtube video, much simpler to understand your problem.
 
Your "Follower" is getting past your "Hold open device". This us usually caused by trying to load more forcebly that is required. You need to bend your follower arm to sort of stretch it so that the follower will not get past the hold open. The mag limiter on the chinese guns is quite small and it is easy to bend the follower arm, that makes it slightly shorter. Also check to ensure that your mag housing is seated properly in the reciever.

Scott
 
can you, at this time ,load more that five? if you can. the floor plate arm may be bent but it did not look bent in the video.it would have to be bent pretty good to slip and jam on the bolt hold tab.. don't file anything ...for some reason that little flip tap on the floor plate arm is to short,or the arm is to short...if you can load 7 or 8 shells then it is maybe bent enough to
jam.
 
DO NOT listen to what I said earlier. I was having an "internet" moment. M39's idea seems much more probably than mine. I would also suggest taking it in to a qualify smith if you can't find out what's wrong with it rather than guess and test with your life.
 
sherlockbonez said:
DO NOT listen to what I said earlier. I was having an "internet" moment. M39's idea seems much more probably than mine. I would also suggest taking it in to a qualify smith if you can't find out what's wrong with it rather than guess and test with your life.
Click to expand...

I don't think most people would value their life at that of a $200 norinco :D A gun smith will also charge you an arm and a leg. Just bent it till it works :D you've already neglected it enough, what's a little abuse going to do to it?
 
You must log in or register to reply here.
Back
Top Bottom