VihtaVuori commercial survey

[Dansy]

I would use....3n38 (lots) 3n37 (some) n350 (some).....

your e-mail doesn't work.......

 

[downwindtracker2]

I use N-560 in my 30-06s,338WM and 308Norma.It's simple reloading,fill the case ,shoot one hole groups.

N-570 should be interesting to those overbores such as 264WM,257Wea. N-560 is too fast.

 

[p-17]

Peter, so far I've had outstanding experience with N550 and N560. I would anticipate buying more in a year or so. I'm also interested in N540.

 

[roberti11]

vit

Peter for me its
N540, N340, N560,

 

[peterdobson]

Correct email peterdobson@ns.sympatico.ca

 

[Grizz Axxemann]

Which one performs like Varget? I'm an idiot when it comes to VV powders

 

[Gibbs505]

I have never used it.
What would you reccomend for :
45acp
38S&W
303 BR
6.5x55
300 win Mag
and
505 Gibbs, with loading info for the last thanks!

 

[ldhill]

I would like to have N-550

 

[downwindtracker2]

Grizz,V V powder burn rates span,for the target 308s, it's the single base N-140 and N-150 .The N-500 series burn rates are roughly the same,though you can get more velocity at the same pressure.The accuracy may not be as good. My buddy's best Farky class load uses N-150.

 

[Inspector]

Peter, N540, N550 N560.
Cheers, Glen

 

[Unforgiven]

I would like n160 for my stuff

 

[peterdobson]

Varget equivalent is N140.
.45ACP, N340, N350 200 gr. Hornady
.38 S&W, N340 146 gr. Lapua LWC
.303BR, N140
6.5X55SE, N160, N560 139gr Scenar
.300 Win Mag, N165, N560 with 185, 190s.

Regards,

Peter

 

[peterdobson]

For 505 Gibbs, only load I could find is 120gr. R15 with 525gr FMJ. Geeez, that must kick! R15 is similar in burning rate to N140.

Regards,

Peter

 

[tac-driver]

I will take whatever works best with .338 Lapua. Have to do some research to find what that powder is....

 

[gunster-old]

I will take whatever works best with .338 Lapua. Have to do some research to find what that powder is....

N170 is an excellent powder for the .338 Lapua.

 

[peterdobson]

Has anyone tried a VV 5 series for .338LM?

 

[Gibbs505]

For 505 Gibbs, only load I could find is 120gr. R15 with 525gr FMJ. Geeez, that must kick! R15 is similar in burning rate to N140.

Regards,

Peter

Do you have anything similar to IMR7828?

I am using 140 grains for the 505 Gibbs!

Yes, it has a bit of a push

 

[peterdobson]

IMR 7828 is between N165 and N170, Don't know which would work best. Would have to do homework on this.

Regards,

Peter

 

[KDX]

What would work well for .223 in a bolt gun?

 

[peterdobson]

N140 for .223 Rem. We'll have to stock a few hundred pounds of this stuff.

Regards,

Peter