Volquartsen ... worth the hype?

olopokram

olopokram

Regular
Rating - 100%
10   0   0
Location
Ontario
Hey everyone!

I've really enjoyed shooting rimfire for the last two years because of the accuracy and low cost. I owned a Savage 17 HMR and couldn't get over its accuracy. I ended up trading it in on an Anschutz 190, which I am very happy with as well. I've always heard great things about the Volquartsen brand and am considering one in 17 HMR. Is it going to be that much more accurate than what I've been shooting? Spending $2K + on a rimfire is getting up there, I just want to make sure that the investment is justified. I don't hunt with my rimfire, just target shooting up to ~ 150 yards. Any input would be appreciated!

Thanks!
 
Only experience I have is a volquartzen barrel a buddy bought, stainless muzzle weighted... ~$350 IIRC.

no more accurate than my dlask .920 $160....

To me, not worth the extra money. But again I haven't handled their rifles.
 
If your going to spend 2 grand and just shoot targets pick up a Cooper 57M. They come in a variety of styles that should fill your requirements.
I know 2 guys who bought one and now own 2 or 3 each. If I could afford one that's where I would spend my money!!
 
.
I do like the Volquartsen accessories, such as triggers, extractors, and such. However, to spend over $2000 to shoot targets, (unless you are thinking of trying for the Olympics,) is like buying a Hummer to transport sacks of cement from the lumberyard to the jobsite, when a good pick-up truck will do nicely.

First of all, what is you EXACT purpose or intended use for this rifle? Have you tried out your Anschutz 190 with different brands of ammunition to see what it will do? What kind of targets, and how large are they that you intend to use this rifle for? Is this for Competition, or more informal use? What would the resale value be if you do not like the rifle or it is not as accurate as you expect?

To me, paying $2000 for a .22 rimfire rifle is not something I would consider doing.
.
 
if you spend 5 k on a space age centre fire and let it sit in the gun safe then you da man but spending 2k on a lowly22 is nuts
spend your bucks on what you enjoy good quality guns and scopes cost but they are better and will make your shooting more fun in that it makes seeing and operating your toys easier spend your bucks on what you enjoy.
 
They sure do make a nice trigger system. From what I've read a Dlask Dar 22 is comparable and not as expensive.??? Life is short if a Volquartsen is what your dreams are made of go for it.
 
Not worth the money, well over priced. I bought a centre fire 204 and it was like a heavy club and shot terrible and jammed every so often. As others have said if your going to spend $2k id go with a Cooper or a higher end Annie.
 
I have alot of experience with Volquartsen weapons and components... So I can give scope to your question... Is it worth it? Depends on what you are referring to.... Volquartsen, as a company is dedicated to clean, efficient and precisely engineered designs... so if you want a "well made" weapon, you can't go wrong... the fit and finish is excellent, as is the engineering. From an accuracy perspective, there are cheaper ways to get there. The above poster who said that a Dlask weapon is equal to a VQ build is out-to-lunch. I would put Dlask barrels on par with VQ barrels (for half the price), I own many Dlask build's and like their products very much... but VQ engineers the entire weapon "in-house..." including the bolt and all trigger components, and then hand fits and beds to each stock. They are VERY fine weapons... and you can expect them to shoot extremely well, they are all tested for accuracy before they go out the door. So my question to you is... What kind of shooter are you? Would you rather pay $600 for a 1/2" @ 50m gun or $1800 for a 3/8" @ 50m gun? Only you can decide where your priority is... I will say this, the fit & finish and quality of the VQ will make joy of ownership and shooting pleasure increase exponentially. Many considering a VQ also look at the Kidd Supergrade... Or you can put together your own Dlask build for about $1100, with premier components... just a thought.
 
P1050059_zpsb30e98f1.jpg

P1030682.jpg


I will let you know when I shoot them :)
 
lthunt said:
if you spend 5 k on a space age centre fire and let it sit in the gun safe then you da man but spending 2k on a lowly22 is nuts
spend your bucks on what you enjoy good quality guns and scopes cost but they are better and will make your shooting more fun in that it makes seeing and operating your toys easier spend your bucks on what you enjoy.
Click to expand...

:agree: Darn good advice.
 
hoytcanon said:
I have alot of experience with Volquartsen weapons and components... So I can give scope to your question... Is it worth it? Depends on what you are referring to.... Volquartsen, as a company is dedicated to clean, efficient and precisely engineered designs... so if you want a "well made" weapon, you can't go wrong... the fit and finish is excellent, as is the engineering. From an accuracy perspective, there are cheaper ways to get there. The above poster who said that a Dlask weapon is equal to a VQ build is out-to-lunch. I would put Dlask barrels on par with VQ barrels (for half the price), I own many Dlask build's and like their products very much... but VQ engineers the entire weapon "in-house..." including the bolt and all trigger components, and then hand fits and beds to each stock. They are VERY fine weapons... and you can expect them to shoot extremely well, they are all tested for accuracy before they go out the door. So my question to you is... What kind of shooter are you? Would you rather pay $600 for a 1/2" @ 50m gun or $1800 for a 3/8" @ 50m gun? Only you can decide where your priority is... I will say this, the fit & finish and quality of the VQ will make joy of ownership and shooting pleasure increase exponentially. Many considering a VQ also look at the Kidd Supergrade... Or you can put together your own Dlask build for about $1100, with premier components... just a thought.
Click to expand...

Not all of them shoot well and the fit and finish and quality in my mind is averagE
 
I only have experience with two different parts kits I purchased at the easter gun show. one was a recoil rod/charging handle combo, and a trigger kit for travel and weight of trigger pull. the charging handle sucks. its just horrible and it took a large amount of fitting and removal of material to actually get the damn thing to cycle with a magazine in. several emails to VQ requestiong some assistance went totally unanswered. the gun cycles but instead of a smooth factory pull its gritty, rough and if I pull too far out on the handle, it tourques the spring/rod sideways and binds the gun completely. the trigger kit was sweet and really made it nice to shoot. needless to say, I switched back to the factory handle and the gun is smooth as butter. I wanna throw the VQ handle in the garbage.
 
Last edited:
This time around, I'm just looking for accuracy. Fit and finish is always important, but in this case I'm going for long distance accuracy. I'm hoping to be reaching out 200 - 300 yards. I know I'm looking for the same thing everyone is! LOL
 
You must log in or register to reply here.
Back
Top Bottom