vz 58 folder loose

[nickgun]

Hey all,

I finally got around to removing the M4 stock from my VZ 58 to install a proper factory folder. It seemed to go on okay, but eventually came loose. I used the screw that the "new" folder came with, so maybe that is the problem. I loctited it place and thought that I was good to go. After about 100 rounds it began to get ever so slightly loose. It is not the arm that is loose. It is the actual mounting screw. Any help from the community would be appreciated.

 

[corwin-arms]

Wipe the oil from the stock, back of the gun and from the screw hole. Mount the gun in a gun vise then take the bigest screw driver you have. Put some wrench on screwdriver for extra leverage, puts the screwdriver in the slot strongly then thigh ten as much as you can. Just don't over do it so receiver is not cracked