Walther PPQ and/or the P99 in .40 S&W?

CristianM

CristianM

BANNED
BANNED
BANNED
Rating - 100%
4   0   0
Location
GTA, Ontario
Is North Sylva importing into Canada the Walther PPQ and/or the P99 in .40 S&W?

If yes, who would the dealer be to buy them from?

I would want a PPQ or a P99 in 9 mm but I don't like threaded barrels. I assume the PPQ and the P99 in .40 S&W would come into Canada without the need of a threaded barrel; their normal barrels are 4.2" respectively 4.17".

Alternatively, in 9 mm they would be nice as well with a custom, non-threaded barrel protruding out of the slide as the Canadian version of the Steyr M9 A1 has.

Anything but not threaded! :HR:
 
I handled the PPQ yesterday and it's great!!!

EXCEPT FOR THE SUPER UGLY threaded muzzle!

The .40 should have no problmes coming here but according to Walther specs...the 9mm is listed as 102mm.

Now this goes without saying that Walther is currently working on a 106mm for us.

Lots of confirmed hear say from canadians on the Walther forums.

I guess we'll just have to be patient and wait.
 
Last edited:
Yes, I handled a PPQ in 9 mm as well, and the first conclusion is: WOW!

I had in mind as well to buy the gun and take it to an experienced gun smith to cut the threaded part. The threaded barrel is 116 mm. Minimum legal in Canada is 106 mm. But I am not sure if the threaded area is less than 10 mm in length.
 
CristianM said:
Yes, I handled a PPQ in 9 mm as well, and the first conclusion is: WOW!

I had in mind as well to buy the gun and take it to an experienced gun smith to cut the threaded part. The threaded barrel is 116 mm. Minimum legal in Canada is 106 mm. But I am not sure if the threaded area is less than 10 mm in length.
Click to expand...

can you legally do that, take it to a gun smith to have shortened ? can anybody confirm that ?
 
CristianM said:
Is North Sylva importing into Canada the Walther PPQ and/or the P99 in .40 S&W?

If yes, who would the dealer be to buy them from?

I would want a PPQ or a P99 in 9 mm but I don't like threaded barrels. I assume the PPQ and the P99 in .40 S&W would come into Canada without the need of a threaded barrel; their normal barrels are 4.2" respectively 4.17".

Alternatively, in 9 mm they would be nice as well with a custom, non-threaded barrel protruding out of the slide as the Canadian version of the Steyr M9 A1 has.

Anything but not threaded! :HR:
Click to expand...

Called them last month they said spring 2013. So I called Wolverine Supplies and ordered my P99AS in .40 s&w
 
johnnybeachboy said:
The rumour is that the P99 barrel will fit the PPQ. Can anyone confirm this.
Click to expand...

i had heard the same thing but I believe there was a post by North Sylva stating that they tried it and while the p99 barrel fit in the PPQ, it wouldn't cycle properly... i'm not a fan of threaded barrels but i might make an exception for this one, it's not as bad looking as most to me, and it is one nice pistol!


http://www.canadiangunnutz.com/foru...eaded-barrel&p=7632117&viewfull=1#post7632117

link added to north sylva response
 
Last edited:
Walter P99 QA search!!

Hi, anyone knows where I could buy a walther P99 QA? (new or used I don't care...) I went to Dante store in Montreal and a few internet and all I could have is the P99 AS. But I really need the QA. Anyone can help?
 
You must log in or register to reply here.
Back
Top Bottom