want a cheap set of die to reload AR-15 .223

[Mobeasto]

Hi guys, my firend is interrested in reloading for is ar-15 .223 so ... He does want a bit of quality but really some ammo at a cheap price... What do you recommend for this caliber and semi-auto or auto action.... I thik that the bullet should be crimped... But no sure

What are you using to reload them...

all thanks in advance

 

[troutseeker]

Remember that for a semi-auto he needs to use "small base" dies. These size the base of the case closer to factory specs to ensure proper extraction.

Troutseeker

 

[beltfed]

Don't bother with small base dies, they are not required. A Properly set up Full length die will do just fine.
For cheap dies, I don't thnk they get any cheaper than Lee.
Lee also happens to make a 'factory crimp' die that works very well.

For a sizer die, I don't think the brand necessarily makes a difference, but I'd go with a carbide die for longevity (you'll still need to lube them).
For an excellent seating die that will eliminate alot of the run out on the finished rounds, look to a Redding competition seating die.

 

[rkaine]

Lee Dies, you can get the .223 in carbide so you don't need to lube either.

 

[ron hilchey]

A chamber check guage is very handy for bulk semi auto ammo.

 

[RePete]

Lee Dies, you can get the .223 in carbide so you don't need to lube either.

You WILL need to lube rifle cases with carbide dies.

Lee do not make .223 carbide dies but Dillon does and the .223 size die only is $108 USD.

 

[lcq]

I use Lee and have never had a problem with either my AR-15 or my 180B. They work just fine and the factory crimp is great.

Brian