Wanted: Ottawa area CZ-858 owner with spare front sight tool

[pierrody]

EDITED:

I have fully re-assembled the rifle from detail strip.

However, I seem to have lost my front sight tool. If you are in Ottawa and have one you would like to sell, PM me.

 

[Dench]

have you tried searching for any youtube videos?

 

[driver71]

You tube is amazing for stuff like that,,I have learned much about certain aspects of all my guns from user videos.,,,,,it even helped me with a couple of things I was having trouble with at university!!!! Hope you find what your lookin for!!!!

 

[pierrody]

The only YouTube video are field strips. I have no problem with that.

It's the reassembly after total detail strip that is getting me hung up.

Perhaps if someone wanted to post a step by step tutorial it would be helpful to me and others.

 

[pierrody]

Actually all I need now is to figure out how to seat upper spring and spring retention lug on the dust cover.

 

[BigDave]

Im not far from Ottawa and i have a 858 you could look at mine if that would help

 

[P0WERWAGON]

the upper spring is a whore to do.

install the u shaped clip thing and install the spring as far as possible.

then let the clip poke out the side of the spring. install the small round part the clip locks onto.

grab the spring in one hand and rotate the everything else. clockwise. the spring will wind its way down untill the end.

kinda confusing to read but you'll figure it out.

 

[NeitArms]

the upper spring is a whore to do.

install the u shaped clip thing and install the spring as far as possible.

then let the clip poke out the side of the spring. install the small round part the clip locks onto.

grab the spring in one hand and rotate the everything else. clockwise. the spring will wind its way down untill the end.

kinda confusing to read but you'll figure it out.

There is a real easy way to do it.. I'll see if I can do up a video to explain.

 

[pierrody]

EDITED:

I have fully re-assembled the rifle from detail strip.

However, I seem to have lost my front sight tool. If you are in Ottawa and have one you would like to sell, PM me.

 

[Stevo]

Do you need to adjust windage, elevation, or both?

 

[Claven2]

I take it you need something like this?

Lots of places sell them. If you can't wait, pop into Gungo on Collonade and Jason will put it in for you, probably for free.

 

[NeitArms]

http://www.neitarms.com/index.php?main_page=product_info&cPath=15&products_id=12

$32

Will not warp, bend or break. Lifetime guarantee.