Weatherby Vanguard 2 recall
- Thread starter mbogo3
- Start date
From the Weatherby web site....
"Important Safety Notice Regarding Weatherby’s Vanguard Rifle
IMPORTANT SAFETY NOTICE
VANGUARD® BY WEATHERBY RIFLE
Weatherby, Inc. of Paso Robles, California, is performing a safety upgrade on all Vanguard® by Weatherby brand rifles manufactured between the years 1970 to 1993.
The affected rifles bear serial numbers from one of the following series on the receiver: 00001 through 03810; V00001 through V80966; VX00001 through VX44065; VS00001 through VS23699; VL00001 through VL46984; W0001 through W0099; NV0001 through NV0099. The safety upgrade will replace the bolt sleeve to prevent misassembly of the bolt, which might occur on the affected rifles. Such misassembly might result into a hazardous condition in which the rifle can be accidentally discharged without the bolt being fully engaged, causing severe injury.
WARNIN
If you own a Vanguard® by Weatherby rifle with a serial number from one of the serial number series referred to above: USE OF YOUR RIFLE MAY RESULT IN AN ACCIDENT AND SEVERE INJURY. STOP USING YOUR RIFLE IMMEDIATELY.... Only the bolt sleeve is being upgraded. Your bolt will be returned to you after the upgrade. If you do not have web access, call Weatherby at 1-800-227-2018 to receive a Bolt Return Kit.
CLICK HERE FOR MORE INFORMATION
NO OTHER WEATHERBY RIFLES ARE AFFECTED. CHECK YOUR SERIAL NUMBER.
The affected rifles were originally sold through licensed gun dealers nationwide, and some of them may have been resold by the original owners through retail gun dealers, trade shows or privately. If you have sold, traded or given away an affected Vanguard® by Weatherby rifle, it is important for you to forward this Safety Notice to the current owner.
Weatherby apologizes for any inconvenience to its customers resulting from this safety upgrade program, but it is important that owners of affected rifles take advantage of this free upgrade program and do not use an affected rifle before it has been upgraded. All work will be done at the factory at no charge. Return the bolt only, not the entire rifle. Please do not return your Vanguard® by Weatherby bolt to the factory before contacting us at 1-800-227-2018 for your Bolt Return Kit."
or you can check it out yourself.
www dot weatherby dot com
This is old news ...
Rob
"Important Safety Notice Regarding Weatherby’s Vanguard Rifle
IMPORTANT SAFETY NOTICE
VANGUARD® BY WEATHERBY RIFLE
Weatherby, Inc. of Paso Robles, California, is performing a safety upgrade on all Vanguard® by Weatherby brand rifles manufactured between the years 1970 to 1993.
The affected rifles bear serial numbers from one of the following series on the receiver: 00001 through 03810; V00001 through V80966; VX00001 through VX44065; VS00001 through VS23699; VL00001 through VL46984; W0001 through W0099; NV0001 through NV0099. The safety upgrade will replace the bolt sleeve to prevent misassembly of the bolt, which might occur on the affected rifles. Such misassembly might result into a hazardous condition in which the rifle can be accidentally discharged without the bolt being fully engaged, causing severe injury.
WARNIN
If you own a Vanguard® by Weatherby rifle with a serial number from one of the serial number series referred to above: USE OF YOUR RIFLE MAY RESULT IN AN ACCIDENT AND SEVERE INJURY. STOP USING YOUR RIFLE IMMEDIATELY.... Only the bolt sleeve is being upgraded. Your bolt will be returned to you after the upgrade. If you do not have web access, call Weatherby at 1-800-227-2018 to receive a Bolt Return Kit.CLICK HERE FOR MORE INFORMATION
NO OTHER WEATHERBY RIFLES ARE AFFECTED. CHECK YOUR SERIAL NUMBER.
The affected rifles were originally sold through licensed gun dealers nationwide, and some of them may have been resold by the original owners through retail gun dealers, trade shows or privately. If you have sold, traded or given away an affected Vanguard® by Weatherby rifle, it is important for you to forward this Safety Notice to the current owner.
Weatherby apologizes for any inconvenience to its customers resulting from this safety upgrade program, but it is important that owners of affected rifles take advantage of this free upgrade program and do not use an affected rifle before it has been upgraded. All work will be done at the factory at no charge. Return the bolt only, not the entire rifle. Please do not return your Vanguard® by Weatherby bolt to the factory before contacting us at 1-800-227-2018 for your Bolt Return Kit."
or you can check it out yourself.
www dot weatherby dot com
This is old news ...
Rob
It seems this thread has been idle for quite some time, but I just got my bolt back from the recall. I find that it does not allow the rifle to be stored with the bolt in and without the spring under pressure. I have sent Weatherby an email asking if this is a function/byproduct of the "upgrade" but have not received a reply as yet. I always prefer to store my bolt action rifles with the bolt closed and no spring pressure but it looks like I'll have to change. Anyone that has had the upgrade care to comment?
Just got a reply from Weatherby. It seems the safety must be in fire position and the trigger depressed when the bolt is locked down in order for the cocking mechanism to disengage. I don't recall for certain if that is the same as before but presume it is. Anyway, problem solved!
ALBERTA BOY
Regular
- Location
- Edmonton, AB
.....of course the safety has to be in the fire position in order to pull the trigger.....
