Well just bought an AR-180b!
- Thread starter Icefire
- Start date
That's a great price!
I've got some nifty projects planned for my AR180B. I haven't done any tinkering with it for a while and figured it's about time I did some more mods.
I'm planning to make my bolt hold open have an external handle to you can operate it from the outside of the rifle. This will be a really easy mod of the do it yourself person and full instruction will be provided.
I've got some nifty projects planned for my AR180B. I haven't done any tinkering with it for a while and figured it's about time I did some more mods.
I'm planning to make my bolt hold open have an external handle to you can operate it from the outside of the rifle. This will be a really easy mod of the do it yourself person and full instruction will be provided.
It's still a possibility but not very high on the priority list due to the limited market.Armedsask what about an AR180 Al receiver ready for tube?
Well just talked to the guy again, going to pick it up tonight.
Come with 3 mags, 1 bipod, 1 mounted scope.
at 100m+ it's more accurate than his Hbar 16" !
That should be a nice toy
Just need to get a 6 pos stock with the adapter and a good looking handguard !
Come with 3 mags, 1 bipod, 1 mounted scope.
at 100m+ it's more accurate than his Hbar 16" !
That should be a nice toy
Just need to get a 6 pos stock with the adapter and a good looking handguard !
IchBinEinSniper
CGN Ultra frequent flyer
- Location
- Brockvegas
Nice...
Call up Wolverine, they will advise and likely send you a new one.
If not, let me know, I'll buy it, cracked or not.
I fired an email to Wolverine, will call them tomorow. The firearm has only 125 rounds and he is very cautious with his ARs from what I could see.
I guess if I buy it I could get one of our machinist with a CNC to copy the design on but in Aluminium or steel and scrap the plastic lower.
I guess if I buy it I could get one of our machinist with a CNC to copy the design on but in Aluminium or steel and scrap the plastic lower.
punkrockboy
CGN Ultra frequent flyer
- Location
- Eastern Bantario!
So, what, he didnt tell you that beforehand? Did you just discover it when you examined the gun?
I had a 180b(just sold it so I could by a real AR)It is probably still worth the 900, especially if you have someone that could machine a proper lower for you! They are great guns, mine was quite accurate, never ever had a feed problem or anything!I just wanted a real AR while I still can, or I never would have sold it.
punkrockboy
CGN Ultra frequent flyer
- Location
- Eastern Bantario!
From what Ive heard, they're hit and miss as well.
The guy didn't knew it, it's cracked on one side, and I had to look good to see it. I told him, it's cracked, he wasn't believing me, he disassembled it and got a better view.
I'll see what Armalite/Wolverine say about it..
Armed, I'm sure it wouldn't be too hard on a CNC, all automatic.
I'll see what Armalite/Wolverine say about it..
Armed, I'm sure it wouldn't be too hard on a CNC, all automatic.
