jonyork CGN Regular Rating - 100% 3 0 0 Location Ottawa Jan 21, 2020 #1 Hey folks, I am restoring a No4mk1 to full wood, and the kit I got came with everything but the forestock cap pins. Is there a place I can get a pair, or what can I replace them with? Thanks!
Hey folks, I am restoring a No4mk1 to full wood, and the kit I got came with everything but the forestock cap pins. Is there a place I can get a pair, or what can I replace them with? Thanks!
Beater CGN Ultra frequent flyer Uber Super GunNutz Rating - 99.6% 442 2 1 Location pallisers triangle Jan 21, 2020 #2 drill rod or, drill bits the right size cut to length
englishman_ca CGN frequent flyer EE Expired Rating - 100% 156 0 2 Location Ontario's Near North, not far from west side of Al Jan 21, 2020 #3 Sinker nails
woodchopper Moderator Moderator Rating - 100% 79 0 0 Location WMU248 near Edmonton Jan 22, 2020 #4 heavy coat hanger is what I used last time I needed to make pins
7 7ECA CGN frequent flyer EE Expired Rating - 100% 10 0 0 Location Lower Mainland Jan 22, 2020 #5 Numrich sells the pins, as well. Might be a worthwhile add on to an order, if you have one in progress.
Numrich sells the pins, as well. Might be a worthwhile add on to an order, if you have one in progress.
Claven2 CGN Ultra frequent flyer Rating - 100% 410 0 2 Location Onterrible Jan 22, 2020 #6 Mild steel nail shafts work too. You file one side flat where they protrude to keep the band centered.
Mild steel nail shafts work too. You file one side flat where they protrude to keep the band centered.
