what did i do wrong here?

[kevin.303]

picture kinda speaks for itself. used set of Lee RGB .30-30 dies.( and yes i lubed it)

 

[44fordy]

Nice Dart!!

 

[mjcurry]

funny this happened to u it happened to me about ten minutes ago! i think the problem is no lube on the inside of the neck.

what i did was lube the indide of the neck with the expander still in the case then( try at ur own risk it scratchs the expander but doesnt ruin it) grab some pliers and pull.

i locked mine into my drill and lock stud and pull and it came out eventually. then i resized 15 375 cases and it worked perfect. just make sure u tighten the top nut but not too tight.

i also polished the expander with some steel wool then with a rag and it works fine now. ive had it happen twice on me.

hope this helps!

matt

 

[kevin.303]

i didn't have the to nut tight enough, it is now.

 

[iceman2]

Every once in a while I dip a case nect in some dry lube, mica powder. Just helps things along. You can also drag a case mouth across your lube pad every once in a while to keep thins slippery. Just my .02