What IPSC Division Equipment and Load?

Fast Toys

Fast Toys

CGN Ultra frequent flyer
Business Member
Rating - 96.6%
28   1   0
Location
Winnipeg, MB
I am curious as to what IPSC Division people compete in and the equipment you use the your load?

Here's mine:

Division = Open
DAA Alpha X holster, belt & Deluxe Magnetic Pouches
9mm Major with Mclearn 2011 based Open Gun
Load = Campro 121 RN with 8.8 grains of 3N38
 
Division = Standard
Benelli M2 26" barrel - highly modified by me
Shell belt = mix of Magload and King Competition
Birdshot = 1oz 7.5 at 1200fps or more depending on what I have on hand
Buckshot = Remington 8 pellet low recoil
Slug = S&B 1oz low recoil
Underwear = Fruit of the Loom
 
Division = Production Optics
Shadow 2 OR with RRK and Trijicon SRO - 2.5 MOA
Belt - DAA Premium, Alpha X holster with 5 Racer Pouches and one separate Magnet
9mm Campro 124 Gr HP with 4.0/4.1 grains Titegroup
 
Production Optics
Shadow 2 OR with Leupold DPP 6 MOA, CGW T5 disco
Ghost belt, Ghost 360 mag pouches, Suomi Ase holster
9 mm Campro 124 gr RN with 0.280 g N320
 
Open-czechmate campro 121 9mm 8.6gn 3n38, jf gunworks basepads
Classic sti sentry, .40 campro 180gn 3.4 titegroup
Production optics- blackbox customs S2 with dpp, jf gunworks basepads campro 9mm158gn 3.3 hp38
 
Division = Open
Safarliand 015 with 077 mag pouches
DTS Custom 2011 with Cheely E2 Agressive grip w/Sig 3XL optic
38supercomp
Load = Campro 121 RNHB with 8.7 grains of IMR 4756
Division = Production / Production Optics
Hammer Armament Hoster and mag pouches
9mm Minor Sig P320, PO w/Sig 3XL optic
Load = Campro 158 with 3.0 grains of Titegroup

Division = Standard (Major)
Safariland 014 with 077 pouches
9mm Major STI Aperio 2011
Load = Campro 180 with N320

Division = Standard (Minor)
Safariland 014 with 077 pouches
9mm Major STI Hawk 2011
Load = Campro 158 with 3.0 grains of Titegroup

Division = Classic
Safariland 014 with 077 pouches
9mm Minor STI Custom Spartan V
Load = Campro 147 with 3.3 grains of Titegroup

Division = Revolver
Speed Beez Holster and moon clip holders
9mm Minor with S&W 929 with Apex Hammer and trigger, Hogue grips and cylinder release
Load = Campro 158 with 3.3 grains of Titegroup
 
Division= Classic, Colt Gold Cup .45 Ghost stinger holster, Campro 230 RN 4.6gr tite group lrg primer
Division= Production, Shadow 1 DAA Race holster or Ghost stinger, 124 BDX 4.2gr tite group
Division=Standard, Tac Sport.40(grey frame) Campro 180 6.1gr Silhouette DAA race holster
Belts= DAA, Mag pouch’s all ghost
 
IPSC,

Production Division:
  • Shadow 2 Orange
  • Henning Group grips and basepads
  • DAA Lynx belt with Alpha X holster and Xi pouches
  • 147gr CamPro 9mm
  • 3.3grs TiteGroup
  • Federal Primers (Ginex for practice)

Standard:
  • Shadow 2 Orange with Springer Precision magwell
  • Henning Group grips and basepads
  • DAA Lynx belt with Alpha X holster and Xi pouches
  • 147gr CamPro 9mm
  • 3.3grs TiteGroup
  • Federal Primers (Ginex for practice)

Production Optics:
  • Shadow 2 Optics Ready with Trijicon SRO 5moa
  • Henning Group grips and basepads
  • DAA Lynx belt with Alpha X holster and Xi pouches
  • 147gr CamPro 9mm
  • 3.3grs TiteGroup
  • Federal Primers (Ginex for practice)

Open:
  • Shadow 2 Optics Ready with Trijicon SRO 5moa and Springer Precision magwell
  • Henning Group grips and basepads
  • DAA Lynx belt with Alpha X holster and Xi pouches
  • 147gr CamPro 9mm
  • 3.3grs TiteGroup
  • Federal Primers (Ginex for practice)

and yes I shoot 9mm minor in Standard and Open. Only difference is mag basepads, I use 2 different sets of Henning basepads, one for use with no magwell, the other for use with a magwell.
 
Slavex said:
IPSC,

Production Division:
  • Shadow 2 Orange
  • Henning Group grips and basepads
  • DAA Lynx belt with Alpha X holster and Xi pouches
  • 147gr CamPro 9mm
  • 3.3grs TiteGroup
  • Federal Primers (Ginex for practice)

Standard:
  • Shadow 2 Orange with Springer Precision magwell
  • Henning Group grips and basepads
  • DAA Lynx belt with Alpha X holster and Xi pouches
  • 147gr CamPro 9mm
  • 3.3grs TiteGroup
  • Federal Primers (Ginex for practice)

Production Optics:
  • Shadow 2 Optics Ready with Trijicon SRO 5moa
  • Henning Group grips and basepads
  • DAA Lynx belt with Alpha X holster and Xi pouches
  • 147gr CamPro 9mm
  • 3.3grs TiteGroup
  • Federal Primers (Ginex for practice)

Open:
  • Shadow 2 Optics Ready with Trijicon SRO 5moa and Springer Precision magwell
  • Henning Group grips and basepads
  • DAA Lynx belt with Alpha X holster and Xi pouches
  • 147gr CamPro 9mm
  • 3.3grs TiteGroup
  • Federal Primers (Ginex for practice)

and yes I shoot 9mm minor in Standard and Open. Only difference is mag basepads, I use 2 different sets of Henning basepads, one for use with no magwell, the other for use with a magwell.
Click to expand...

Do you take the magwell on and off or do you have 4 different guns?
 
Division = Production
Ghost Thunder holster, Ghost 360 mag pouches X 5 (first pouch has side mounted magnet)
CZ SP01 Shadow, 9mm Minor
Load = Campro 147 RNFP with 3.4 grains of Vihtavuori N320
 
Production

SP-01 Shadow, 9mm
CR Speed belt/pouches with BSG holster
Load: 147gn Campro with 3.3gn TG

Standard

SP-01 Shadow with magwell, 9mm minor
CR Speed belt/pouches with BSG holster
Load: 147gn Campro with 3.3gn TG

Production Optics

Shadow 2, 9mm, Vortex Venom
CR Speed belt/pouches with BSG holster
Load: 147gn Campro with 3.3gn TG
 
Classic,
Commercial 9mm , 124 grains.
Dan Wesson PM-9 ,
Wilson combat mags,
CR Speed belt and 5 mag pouches, one magnet,
Blade Tech holster.
 
@.30/06 FTW
For my match guns I just run the Orange in PD and Standard, swapping the magwell on and off as needed (or sometimes I'm lazy and run it without the magwell, but they are fun). For Production Optics.Open I have a dedicated Shadow 2 OR that I swap the magwell on and off of the same as I do with the Orange.
For my practice guns I have 2 Shadow 2s that CZUB did up for me from the first run of frames they made, full in house custom shop fitting. I still did all my own springs and stuff once I got em though lol. One of those cracked and I got a new frame for it, which is now a dedicated 22 Shadow 2, and I had both those old frames milled to stop the crack from occurring (on the one that hadn't) and spreading on the other one. Both are around 150k through them each at least.
I still need to get a new Orange and another OR so I have a proper set of match/backup guns for them, as I use one of my original Arcore frame guns as my backup to the Orange. If all those break or burn up I have 11 Shadowmates to draw on.
 
Slavex said:
@.30/06 FTW
For my match guns I just run the Orange in PD and Standard, swapping the magwell on and off as needed (or sometimes I'm lazy and run it without the magwell, but they are fun). For Production Optics.Open I have a dedicated Shadow 2 OR that I swap the magwell on and off of the same as I do with the Orange.
For my practice guns I have 2 Shadow 2s that CZUB did up for me from the first run of frames they made, full in house custom shop fitting. I still did all my own springs and stuff once I got em though lol. One of those cracked and I got a new frame for it, which is now a dedicated 22 Shadow 2, and I had both those old frames milled to stop the crack from occurring (on the one that hadn't) and spreading on the other one. Both are around 150k through them each at least.
I still need to get a new Orange and another OR so I have a proper set of match/backup guns for them, as I use one of my original Arcore frame guns as my backup to the Orange. If all those break or burn up I have 11 Shadowmates to draw on.
Click to expand...

You need to lose the Standard rig Slavex .........



Standard
Bul Radical 5.4
Double Alpha XI holster, various mag holders
180 gr 40 S&W 5.6gr of TG
 
Classic, Tanfoglio Witness Custom, 45acp
230gr campro with 5gr of win231 under
Bladetech holster with doh
Belt I think is daa, could be doubletap
 
I'm in Brazil.
Pistol Caliber Carbine - PCC
Taurus CTT-40
180 grains bullets, CBC 219 powder, it's about 140 power factor (40 reloaded minor, of course).Same load does about 130 power factor in my Production Glock G22.
Holossun 510C (love it!).
 
hillbros_96 said:
You need to lose the Standard rig Slavex .........
Click to expand...

whatcha mean? the gun? or the holster and pouches? If they'd make a 40S&W Shadow 2 I'd probably get one just so I could slum in Standard with a major load, but 9mm seems to be the future of that Division anyhow, with more and more makers not even offering 40 in their premium guns anymore.
 
Slavex said:
whatcha mean? the gun? or the holster and pouches? If they'd make a 40S&W Shadow 2 I'd probably get one just so I could slum in Standard with a major load, but 9mm seems to be the future of that Division anyhow, with more and more makers not even offering 40 in their premium guns anymore.
Click to expand...

How do you fair shooting minor in Standard? Was always curious if it ended up being an obvious disadvantage.

. .

Production
CZ Shadow 2
DAA Lynx Belt, 5 DAA Racer Pouches
BOSS Holster Hanger and Red Hill Tactical Holster
Load: Factory 9mm baby
 
You must log in or register to reply here.
Back
Top Bottom