What's your price?

Tapco.jpg


Gentlemen......the Crapco 305. Total cost 6 dollars Canadian (excluding bang bits) still looking for a shorty to part out.

More than makes up for the money I have pissed away on this big bugger

Untitled5.png


Its all good fun tho eh :) And Rocket..............Im lookin to get more than a bit of cake ;) LOL
 
Great thread. Photos should be mandatory. Its interesting to see what can be done for _____ much money. And I'm curious to see how many rupees I'm in for. All prices include S/H, tax etc.

503.56.......Norinco M305 w/ 2 mags, sling (wanstalls)
39.20.........extra mag (lever arms)
57.24.........Black Arrow spring guide (m14.ca)
169.24.......CASM genII mount (m14.ca)
60.............Bi-pod
10.............Camoform wrapped cheekrest
22.............Scope rings
535.40.......Bushnell Elite 4200 2.5-10X40 (lever arms)

1396.64

Happy shoosting!

8189106591_ec65d6a3e3_c.jpg
 
Last edited:
450$ M305
40$ Op Guide Rod form Marstar
120$ SA Scout Mount
60$ USGI stock from Ebay
200$ Burris Scout scope used
30$ Leupold rings

Total 900$

Beating an AR shooter with a 3k+ race gun at a the 500m Service Rifle snaps
Priceless.
 
I'll play

Total cost Inc tax and shipping
500 - Rifle
700 - Blackfeather stock, Op rod spring guide, CASM scope mount
70 - Vltor carbine buffer mil spec, Magpul enhanced buttpad
105 - Magpul CTR stock
75 - Tubbs CS Springs, Shims, Hogue AR grip
550 - TRW usgi trigger group with M14Doc NM trigger job, TRW USGI gas assembly, Oversized Mag release

Total 2000
 
565----- -m305 long 2 mags and case of ammo .....can ammo speicial I may not have the price right (let me know if i dont )

565 -----m305 shorty 2 mags and case of ammo

35 ------5 round mag

40------- fluted spring guide

75-------Italian connection m59 sights

45-------flash suppressor with bayonet lug / and ping

20 ------bayonet used yard sale

20 -------paint

-500------ I sold the shorty Shorty and 5 round mag kept the ammo and mags

$865 total spent more or less…..That gives me a M305 that pings , 4 mags. 1040 rounds of ammo and a heck of alot of fun

DSC01599.jpg
 
Last edited:
Lol along with others Im going to regret this lol.

Rifle-$470
ICR stock-$540
VLTOR casv-14-$360
Op rod spring guide-$50
Fab defense buttstock, buffer tube and pistol grip-$150
Eotech 552-$650

Total-$2220

But walking through the bush in deer season with something that looks like that.... priceless hahaha
 
what didnt you like about the rubber but pad? mines in the mail. Also considering using a garand but pad + bedding.[/QUOTE]

I just didnt like the LOP[/QUOTE]

Ya plus the b.s. with trying to get the stock screws to fit it....
 
$450 m305 shorty
$120 boyds stock
$20 sand paper and rub on urithane
$35 sadalak op rod
$15 shims
$500 custom break kit with tools (original thread were damaged to take off welded one stock muzzel break)
$40 USGI triger parts to replace norc ones that were causing run away firing, much smouth triger now anyways
$15 USGI stock steel
$85 'bits and piece" gas cylender lock "nut" with front sight post rail
$8 locktite for rear sites, front sites, stock screws, op rod guide.... lets face it its takes almost a hole tube to tighten up a norc.

$1288 pluss all the shipping and inport fees.

BTW Im selling this if anyone is intrested, $800; I got a new LRB m25 on the way

2012-11-28%2B16.35.22.jpg
 
Well let's see;

I got my 2007 Norc M14S used about 3-4 years ago for $300 cash.
Got an unfinished Boyds walnut M1A stock on sale a few years back for $70 on sale.
Bought a used M1A rear sight assembly on the EE for about $75.

So all total $445 which is still $55 less than the brand new sticker price before tax and shipping lol
Plus I sold the Chu Wood stock for $40
And the rear sight assembly for parts for $10

So if I factor those dollars I made back off the stock parts I sold, I paid $395 for this rifle:

http://www.canadiangunnutz.com/foru...ition-Norc-M14S-M305-Ability-amp-Accuracy-FYI

I would say I'm happy with my low amount of dollars spent lol
 
Well, I'm probably going to regret doing this as well lol. It's a slippery slope once you start!
All these prices are approximate because I'm at work and can't remember exact #'s but they are pretty damn close.
- M305= $550(bought about 4 years ago before the price came down)
- Blackfeather RS= $700
- CASM mount= FREE :)
- op-rod spring guide= $40
- Smith Navy brake= $175
- Magpul PRS stock= $400
- Magpul MIAD grip= $40
- Magpul vertical grip= $35
- GG&G Harris adapter= $45(not pictured)
- Harris bi-pod= $120
- Pod-loc= $35(not pictured)
- Vortex 35mm precision ground rings= $175(pricey but nice rings)
- Millet LRS-1 5-25x56mm scope= $650
- 20 round mag= $65(more expensive than most, but it's a beautiful blued finish)

Total= $3030

Now for pics :)

2f270ec9b04e3dfbc4d491cb7ee8a479.jpg


e8cff2ea1d7241161bc66b32f2f0a6cc.jpg


44252973e5ab8dcf4d411b56c205a206.jpg


bcd569eae6d7df5960c1914ccf7e3d2a.jpg


4161ca6b50f5f50d92ddf483bbb6a4e3.jpg


Sorry for the crappy pics, they were taken with my phone. Let me know what you think!

Cheers
 
Last edited:
Longshot84 said:
25rm9ap.jpg


Well, I didn't build this one unfortunately...but it's still worth posting :D

Norc M305
Op rod Spring guide
Magpul PRS
Magpul grip
US optics scope mount
Super Sniper all weather 20x scope
Troy MCS
Bipod of unknown origin
??? not sure what else, haven't had time to strip it down and look :(


$1200, and a big thanks to Dlask!!
Click to expand...

So you bought that entire build for $1200?
 
You must log in or register to reply here.
Back
Top Bottom