When is the M305/M14 Norinco Boat Docking at Marstar?
- Thread starter Coyote Ugly
- Start date
- Location
- Edmonton, AB
scs said:just get a credit card in your name only,just for such emergencies,works for me
I did... but that idea backfired. so I cancelled it, and am slowly paying it off.
Guns.....
Get a second job..... then you can aford Guns, Girls, Home Renovations, and Vacations.....
Take me for expample.... 3 jobs.... its killing me BUT I get to purchase what I want..... its worth it. DO IT BEFORE YOU GET MARRIED!!!!!!!
HP
Get a second job..... then you can aford Guns, Girls, Home Renovations, and Vacations.....
Take me for expample.... 3 jobs.... its killing me BUT I get to purchase what I want..... its worth it. DO IT BEFORE YOU GET MARRIED!!!!!!!
HP
I got a nice envelope with a green piece of paper in it which says i own one. so it cant be long before it shows up in the mail . I cant wait .
I used a free translator on the web for this quote from hfp75
i was wondering if its a crappy translation or was Himmler smoking a reefer at the time ?
Heinrich Himmler 1935
"Deutsch, die wünschen, Schusswaffen zu benutzen, sollen den SS oder den SA - gewöhnliche Bürger müssen nicht schießen anschließen, als ihre habenden Gewehre dem Staat nicht dienen."
Heinrich Himmler 1935
Speaking at the Potsdamplatz weed shoppe?
"German, that wish to use firearm, should SOWED the SS or that - usual citizens don't have to shoot connect do not serve of having when hers weapons to the country.
I used a free translator on the web for this quote from hfp75
i was wondering if its a crappy translation or was Himmler smoking a reefer at the time ?
Heinrich Himmler 1935
"Deutsch, die wünschen, Schusswaffen zu benutzen, sollen den SS oder den SA - gewöhnliche Bürger müssen nicht schießen anschließen, als ihre habenden Gewehre dem Staat nicht dienen."
Heinrich Himmler 1935
Speaking at the Potsdamplatz weed shoppe?
"German, that wish to use firearm, should SOWED the SS or that - usual citizens don't have to shoot connect do not serve of having when hers weapons to the country.
M14 from Marstar has arrived!
My nice new cosmoline covered M14 arrived yesterday. I was up most of the night cleaning it during whcih I found this site. Great info, thank you all!
Thanks to John and staff at Marstar for prompt shipping and great service.
I didn't get any little green slip from the Govt yet though. Is this an issue?
My nice new cosmoline covered M14 arrived yesterday. I was up most of the night cleaning it during whcih I found this site. Great info, thank you all!
Thanks to John and staff at Marstar for prompt shipping and great service.
I didn't get any little green slip from the Govt yet though. Is this an issue?
Stopped at the post office on my home from work yesterday and was rewarded with a big box. 
I was surprised to see the cleaning kit and a sling included as well, since they were not mentioned in the ad. I have been disassembling and cleaning, everything looks great. Now I have to go find those posts that mentioned what lube to put where.
Thanks John. I will definitely deal with Marstar again.
RPM
I was surprised to see the cleaning kit and a sling included as well, since they were not mentioned in the ad. I have been disassembling and cleaning, everything looks great. Now I have to go find those posts that mentioned what lube to put where.
Thanks John. I will definitely deal with Marstar again.
RPM
Pete031, it came with one mag. I don't know enough about them whether its a 5/10 etc. FWIW it measures 2 1/4" high at the front and 2 1/2" at the back.
RPM
Hungry here: Keep that 5 rounder for hunting, actually, I use that 5 rounder for benchrest shooting or testing loads. The rest of the time for hunting and competition, I use the 5/20 rounders.... easier to grab and rotate forward during the magazine extraction process.
RPM
Hungry here: Keep that 5 rounder for hunting, actually, I use that 5 rounder for benchrest shooting or testing loads. The rest of the time for hunting and competition, I use the 5/20 rounders.... easier to grab and rotate forward during the magazine extraction process.
Last edited by a moderator:
- Location
- southern ontario
I ordered one a while ago. Friday I got my registration papers in the mail. I'm pretty excited. I hope I get a cleaning kit and a sling too! and a 5/20 would be sweet
Is it Christmas yet? because it sure feels like it.
Edit: I missed the postal guy on Friday, I'm going to pick it up monday, exactly 1 week sooner then I was expecting it to arrive
Is it Christmas yet? because it sure feels like it.
Edit: I missed the postal guy on Friday, I'm going to pick it up monday, exactly 1 week sooner then I was expecting it to arrive
Last edited:
Received my new M305 on Thursday, including cleaning kit and 5/5 round mag. VERY NICE!! NOT HAVING THESE NICE GUNS KHAZACKSTAN!
It's my #3 "backup" M305. Hopefully, we can hold the liberal anti's at bay long enough for me to leave these to my boys once they are old enough.
Now I have to go and modify another USGI syn stock.
It's my #3 "backup" M305. Hopefully, we can hold the liberal anti's at bay long enough for me to leave these to my boys once they are old enough.
Now I have to go and modify another USGI syn stock.
The Cocker
CGN Regular
- Location
- Fraser Valley B.C
Mine should be here next week. I got one for my room mate too....he's been dyin for it.
Got my registration and my new M14s on Thursday! I was expecting to wait another week so I am happy, happy happy.
Some feedback: my rear sight (the actual aperture is bent - i.e. if you look at it from the top the aperture is not perpendiculer to the rifle)
The other little thing is that the op rod guide is loose.
Hungry here: Loose op rod guides? Not to worry. In the past a few of us had driven over to Home Depot. Buy a few roll pins of different diameters and lengths. Then place a small block of wood (2x4 end cut) to support the op rod guide (remove handguard of course) and whack a smaller diameter pin THROUGH the existing chinese factory roll pin. Other CGNutters have had success glass bedding that op rod guide in place. No joking. See if that roll pin fix works for you. Keep a shzt load handy...
Came with a gun case, sling, 5/5 mag and cleaning kit in the stock... the thing that made me laugh, the cleaning kit includes a grease tube, which they oh so genrously fill with the nastiest dirty black motor oil-like substance. Gee THANKS, you can Keep your toxic waste China LOL
Some feedback: my rear sight (the actual aperture is bent - i.e. if you look at it from the top the aperture is not perpendiculer to the rifle)
The other little thing is that the op rod guide is loose.
Hungry here: Loose op rod guides? Not to worry. In the past a few of us had driven over to Home Depot. Buy a few roll pins of different diameters and lengths. Then place a small block of wood (2x4 end cut) to support the op rod guide (remove handguard of course) and whack a smaller diameter pin THROUGH the existing chinese factory roll pin. Other CGNutters have had success glass bedding that op rod guide in place. No joking. See if that roll pin fix works for you. Keep a shzt load handy...
Came with a gun case, sling, 5/5 mag and cleaning kit in the stock... the thing that made me laugh, the cleaning kit includes a grease tube, which they oh so genrously fill with the nastiest dirty black motor oil-like substance. Gee THANKS, you can Keep your toxic waste China LOL
Last edited by a moderator:
I got my baby Yesterday . Thanks John fast service I was dragging my Ass about going back to work after lunch and just as well or i would have missed postie .
I had to wait till later to clean her all up after downloading some instructions how to get the thing appart .
Im hoping to go down the range later today . I got a Nagant to try out too .
I had to wait till later to clean her all up after downloading some instructions how to get the thing appart .
Im hoping to go down the range later today . I got a Nagant to try out too .
- Location
- southern ontario
got mine apart and couldn't get the firing pin assembly (that could be the name for it) back onto it's rail! Argh, I finally got it after 1/2 hour of fiddeling with it. So, you can pull the op rod handle out just a little at a certain spot, just enough to get that little bearing back in it's home now all I need is to get some grease and a bore brush.
Hungry here: You will notice that on the right (starboard side) side directly beneath the rear sight windage knob, there is a cutout above the op rod raceway. You will notice that their is a guiding 'tab' in the interior of the op rod, this tab interfaces with the op rod raceway. Keep it greased and lubricated. Once that tab on the op rod is aligned with that cutout on the raceway, gently lift up the op rod handle or sometimes with Sproingfield INC rifles, I will gently pry upwards with a flat bladed screw driver (masking tape on the screwdriver's shaft), that's usually enough encouragement needed to get the op rod out of the op rod raceway.
Notice I said 'Sprinfield', I mean Sproingfield INC rifles, their recievers are sometimes lacking in quality control. The Norinco recievers are just so well made.... well except for that s2pid set screw on the right side of the barrel shank....
now all I need is to get some grease and a bore brush.Hungry here: You will notice that on the right (starboard side) side directly beneath the rear sight windage knob, there is a cutout above the op rod raceway. You will notice that their is a guiding 'tab' in the interior of the op rod, this tab interfaces with the op rod raceway. Keep it greased and lubricated. Once that tab on the op rod is aligned with that cutout on the raceway, gently lift up the op rod handle or sometimes with Sproingfield INC rifles, I will gently pry upwards with a flat bladed screw driver (masking tape on the screwdriver's shaft), that's usually enough encouragement needed to get the op rod out of the op rod raceway.
Notice I said 'Sprinfield', I mean Sproingfield INC rifles, their recievers are sometimes lacking in quality control. The Norinco recievers are just so well made.... well except for that s2pid set screw on the right side of the barrel shank....
Last edited by a moderator:
