The Cocker
CGN Regular
- Location
- Fraser Valley B.C
Got mine and my roommates today....they seem all in good order. We couldn't put them down for the first 2 hours we had them....our clothyes go all greasy.
Last edited:
When is the M305/M14 Norinco Boat Docking at Marstar?
- Thread starter Coyote Ugly
- Start date
Just got mine.
Strips like my mini14.
Barrel seems indexed properly.
Sling, cleaning kit, 5 round mag, extra 5/20 round mag (added to order), gun case.
Rear sights are difficult to adjust, like it’s tightening something when it shouldn’t be.
Hungry here: Take a flat bladed screwdriver and back off the windage knob pinion (right side of sights) by about ONE klik, it's spring loaded, but that should release some tension on the elevation knob pinion.
Sights shouldn't be hard to figure out, unless someone wants to fill me on how these should be adjusted/ tightened.
Hungry here: Don't mess with the sights unless you # 1..Shoot with iron sights & #2 are willing to replace them with USGI sight parts. Chinese rear sight threads on Elevation pinion are SHZT
Also, looks to be tapped on left side of receiver for scope - is this correct?
Yes, it will take a Springfield 3rd Gen mount or ARMS # 18 mount. Save your sheckels and get either one of the 2 mentioned mounts. Anything cheaper will be made more expensive by increased expenditure of Advils. That's if you are gonna scope the rifle. Welcome to the addiction.
Jeff
Strips like my mini14.
Barrel seems indexed properly.
Sling, cleaning kit, 5 round mag, extra 5/20 round mag (added to order), gun case.
Rear sights are difficult to adjust, like it’s tightening something when it shouldn’t be.
Hungry here: Take a flat bladed screwdriver and back off the windage knob pinion (right side of sights) by about ONE klik, it's spring loaded, but that should release some tension on the elevation knob pinion.
Sights shouldn't be hard to figure out, unless someone wants to fill me on how these should be adjusted/ tightened.
Hungry here: Don't mess with the sights unless you # 1..Shoot with iron sights & #2 are willing to replace them with USGI sight parts. Chinese rear sight threads on Elevation pinion are SHZT
Also, looks to be tapped on left side of receiver for scope - is this correct?
Yes, it will take a Springfield 3rd Gen mount or ARMS # 18 mount. Save your sheckels and get either one of the 2 mentioned mounts. Anything cheaper will be made more expensive by increased expenditure of Advils. That's if you are gonna scope the rifle. Welcome to the addiction.
Jeff
Last edited by a moderator:
Thank you Hungry.
Another question.
I have messed with my rear sights. When the elevation knob is dialled down what should the reading be? - I've got mine set to "2" - is this correct?
Still can believe this thing was 400 bucks. Crazy!
Thank you,
Jeff
Another question.
I have messed with my rear sights. When the elevation knob is dialled down what should the reading be? - I've got mine set to "2" - is this correct?
Still can believe this thing was 400 bucks. Crazy!
Thank you,
Jeff
bclinehand
CGN frequent flyer
- Location
- Clearwater B.C.
Both of mine showed up today.........gotta get the boxes open now
Well I got mine today,
Came with a Combination tool, Bore brush, rods and oil. I got a sling, 5 round mag and a case all from Marstar... On top of that I got a 20/5 round mag, recoil buffer and guide rod. The stock is beautiful, a dark almost burgandy color. But that is to be replaced by a synthetic being made for me. Most of the cosmoline had already been wiped off, which was nice. Everything seems to be in tip top shape and I hope to fire this weekend.
Came with a Combination tool, Bore brush, rods and oil. I got a sling, 5 round mag and a case all from Marstar... On top of that I got a 20/5 round mag, recoil buffer and guide rod. The stock is beautiful, a dark almost burgandy color. But that is to be replaced by a synthetic being made for me. Most of the cosmoline had already been wiped off, which was nice. Everything seems to be in tip top shape and I hope to fire this weekend.
Just a heads-up for those still waiting for an M305/M14S. Epps has several in stock as of yesterday (Sat.20 Jan.). I just picked up my second one! This one isn't even as greasy and smelly as the first one.
Hurry up, it sounds like they're going fast.
John
Hurry up, it sounds like they're going fast.
John
JDForBrkFst
CGN frequent flyer
- Location
- Roughly North Central AB
Epps? How much are they there?
Dark service is outstanding, package arrived safe and in good order with 2 * 5 round mags, 1 20/5 mag, a sling and clenaing kit, shipped to my door, and pre-registered without hassle for $500.00
From this point on Dark will be getting all my business. When you factor in the cost of the items they include, they are substantially lower priced than Marstar and the service is excellent, and without a hitch.
From this point on Dark will be getting all my business. When you factor in the cost of the items they include, they are substantially lower priced than Marstar and the service is excellent, and without a hitch.
Zorak said:
I got mine from marstar for $445 deliverd and also hassle free . And as All nork stuff comes from marstar (correct me if im wrong and im sure i will be), i wonder where Dark gets em from . Or Millarm`s $500 norks for instance ?
JDForBrkFst
CGN frequent flyer
- Location
- Roughly North Central AB
disregard...I found it about 2 and a half seconds after making this post.
