which 9mm 147 grain for ipsc ?

[MrFritz]

I'm getting some keyholing with my lastest load using West Coast 147 gr EMJ.

Is there anything I can change in my press setup that would fix the problem, or do I need to find another bullet?

 

[OPC X6]

Try using Accurate 7 powder in 9mm, cured all tumbling/accuracy problems in my Glock 17L

 

[hal1955]

How about titegroup ?

 

[Rapt]

Have had good luck with Frontiers. Except for a few that were peeling jackets in my 10mm... Just eased back on the crimp to fix that.

 

[johnone]

Hi Guys;
If you don't think plated bullets work, drop by the Frontier site and see who now shoots for them in competition....
http://www.frontierbullets.co.za/
We have yet to get any complaints, many, many shooters are using them in competition.... Under various trade names, all made by Frontier
Regards
John

 

[maurice]

Yes, Frontiers work well. Some plated do not work well in some guns.

 

[Gailamir]

All I use in my G17 is plated, and usualy Wolf's loads. Never had a problem.

 

[Dansy]

Frontier in my 9mm Majpr or my 38SC are fine indoor...but at longer distances 30m + they do not group as tight as the Montana gold 124 RN or Hornady 125 HAP...(which I used outdoor) and make small popper at 50 meter rather hard to hit

 

[9x19]

I find that plated bullets don't shoot worth a s**t through my Elite II

The same s**t shooting CZ-75 and Glock17/34, keyholes every second shot