which mould for 45 acp

[GRS1]

Looking for a mould for my new Norinco 45 acp. Would prefer a Lee 6-cavity,
but am having a hard time deciding on a bullet design that would feed reliably. Any help would be appreciated.
Thanks Gord

 

[Rod B]

I have had very good results with the Lee TL 200gr SWC mould.

 

[phishroy]

we get the lee 6 cav' molds in frequently. send me a pm if interested.

 

[easyrider604]

Get the 230 grain Round Nose for positive feeding.

My 230 grain truncated cone bullets sometimes hangs up between the feed ramp and barrel throat, which has never happened with the round nose bullets.

Accuracy is about the same.

 

[sunray]

230 grain RN's or Flat Points feed 100% reliably out of my Colt with target loads.
"...sometimes hangs up between..." Your pistol needs to have the feed ramp extended about half way up the chamber.

 

[GRS1]

Thanks for the replies. I was trying to decide on either the Lee 452-200 SWC or the Lee 452-228-1R just beceause I prefer a conventional lube bullet but wasn't quite sure of the design itself. Still undecided but thanks again for the replies
Gord