Which Progressive loader do you use?

[Katana]

Lee Load master and I can't say that I will buy another Lee. Warranty is good, but the priming system is just crap. Got it as I was on a tight budget but when the opportunity rises, I will be getting a Dillon.

 

[Old30-06]

Loadmaster - takes some setting up and getting used to time. Loadmastervideos.com was very helpful in the setup

 

[hawkrider]

.

 

[pmt]

I have two 550's. One is set up for 9mm & 40S&W complete with separate heads, casefeeder/strongmount/roller handle & bullet tray. The other is set up for .223 (AR) on a strongmount.
All loading for my .308 & .223 bolt guns is done on the Rockchucker.

 

[1948]

Dillon 650 X 2, one for large primer and the other for small.

 

[john simmons]

lee 1000 x2 but i think in the future i will step up to a Dillon.Tried a friends and found it to be really smooth.

 

[simar]

RCBS Pro2000... just setup for 9mm

 

[Hoser-eh]

Since buying the Dillon XL-650 with electric casefeeder, the Lee Pro 1000 has been retired from service. I'm loading 9mm.

I'm 100% certain I made the right choice.
Priming system is great.

All the time I used to spend pulling bullets with no primer is range time now.

 

[Canuck223]

My first progressive was a Hornady Pro-jector. I thought it was great, but felt held back my the flaky primer system and the non-cotter pinned primer pick up tubes. I didn't love the automatic powder system, as it was prone to fail.

When I bought my first AR-15, I realized I needed to be able to deal with crimped primers. I bite the bullet and skipped the Dillon 650, instead moving up to the 1050.

 

[buckbrush]

had a Dillon 550, it was pretty good. I got a deal on a RCBS 2000 and ran both for a while to compare. The RCBS is better than the 550 in every way except the quality of the casting prep-sanding before painting.

I kept the RCBS 2000 and sold the Dillon 550.

 

[Paulinski]

I use 650 and Square D - would like to add one more 650 and 550 to the stable.

 

[jdman]

Just got a dillon 550, and conversions for 9mm,40,44mag,45acp,223....
Now have to learn how to use it.

 

[556NATO]

I had a dillion 550 then a Dillion 650 NOW a Dillion Super 1050

 

[ampegor]

Just one dillon 550 with conversions for 9mm, .40, .38, .45 and soon .308.
Andy

 

[Silverback]

I started out with a Dillon 450 in 1985, then in 1990 I replaced it with a 550 which I still use to reload 11 calibers.

 

[JohnC]

dillon 1050 but strill use RCBS ammomaster for lower volume work

 

[tgt40]

650 but I've got an old pro-jector that loads for my light duty needs.....

 

[nognog]

Dillon 550 and XL650

 

[Airwolf]

Dillon 550b with the casefeeder....And I don`t find it all that difficult to change priming systems....

 

[Cocked&Locked]

My first progressive was a Hornady Pro-jector. I thought it was great, but felt held back my the flaky primer system and the non-cotter pinned primer pick up tubes. I didn't love the automatic powder system, as it was prone to fail.

When I bought my first AR-15, I realized I needed to be able to deal with crimped primers. I bite the bullet and skipped the Dillon 650, instead moving up to the 1050.

I use a LnL projector. I had minor issues with primer feed, i now place a rod on top of the primers in the tube to put a bit of weight on them, and marked it to show the primer level. No issues since. I've never had the powder drop fail, i'm not sure how it could. I added the case feeder, find it pretty good, it did speed me up. I need to get the up graded eject system, the origiinal one was crap, jammed all the time, especially on 9mm.