tymarshall
Member
- Location
- Didsbury, Ab.
Make sure you don't just move 1 screw (if you move one you need to move the other). If it is not feeding well, I think you need to adjust the feed angle which is by adjusting both back or both front. If it it fitting snug now and is the fit you like then whatever you adjust the front or back the opposite must be done to the other set of screws. For example: if you want the feed angle to be lowered make the front screws taller and the back screws shorter. Feed the first couple through your rifle and see where they are hanging up. If it's catching on the top of the round, lower the feed angle. On the bottom raise it.




















































