winchester 50-95 help

C

customs954

Member
Rating - 99.6%
556   2   0
Just purchased an uberti 1876 in 50-95. Does anyone out there make cast bullets for this rifle .512 diameter(correct me if wrong) in weights 350 grain and upwards, or can put me onto a custom bullet maker. I know there is one who sells on this sight but have lost his contact info, got some 38-55 from him awhile back. Thanks
 
You're thinking of Terry at Jet Bullets? Best to slug your bore and confirm size. Accurate bullet molds has a couple of 350gr molds for 50-95. I was just reading up on that cartridge. Good luck with it and keep us updated.
Regards, Bill
 
thanks Bill I did get hold of terry, I have the 350 gr mould which he has offered to use to creat me some projectiles. Really appreciate the quick response.

rob
 
I've shot the Lee modern minie (AKA soup can) with paper patch to bring it to .513. It is very accurate ( cloverleafs at 50yds) but has to be single loaded. The flat nose won't go up the feed ramp.
 
You must log in or register to reply here.
Back
Top Bottom