greyman441
CGN Regular
- Location
- Wasaga Beach, ON
Now before you guys plead and swear at me for doing this look at the pics and read the description. It was missing some parts when I got it. When I striped the gun down, I found some parts that were also broke so until I get the parts, I will update this slowly. I am basically bringing this back from the dead so I will show you guys the process same as I did with the N.R Davis and Sons shortie/backpacker. Depends on what this looks like when I am done, I plan on removing the polly choke and getting it threaded for chokes.
Now heres the plan. I am ordering a new Left extractor, shell stop spring, left shell stop, action slide hook screw, and 2 shell stop screws. (BTW if anyone has these parts and your willing to sell them, send me a PM.) I plan on removing the heavy scratches on the receiver then bead blasting and re-bluing everything. Stripping the stock and cleaning it up to look nice. I am not making this into a collector gun, it is way past that stage. Now it is going to be a shooter.
This is what the gun looked like when I got it. As you can see it had a hard life.
This I what it looks like as of tonight.
There will hopefully be updates frequently so keep checking back.
Now heres the plan. I am ordering a new Left extractor, shell stop spring, left shell stop, action slide hook screw, and 2 shell stop screws. (BTW if anyone has these parts and your willing to sell them, send me a PM.) I plan on removing the heavy scratches on the receiver then bead blasting and re-bluing everything. Stripping the stock and cleaning it up to look nice. I am not making this into a collector gun, it is way past that stage. Now it is going to be a shooter.
This is what the gun looked like when I got it. As you can see it had a hard life.
This I what it looks like as of tonight.
There will hopefully be updates frequently so keep checking back.
Last edited:
