Dick357mag
New member
- Location
- Ottawa Valley
Hi Folks,
I finally located a firing pin for the Winchester Model 150 rimfire lever action.
The problem is getting the old pin out of the bolt? I removed the firing pin stop-pin, which allows the firing pin to slide back, but not out of the bolt.
When the firing pin is moved back, I can visually see the firing pin ball and spring. The bolt sees to be a 2 piece, but does anyone know how it splits or comes apart?
Any help would be appreciated.
Update>>>Apparently the Winchester Model 190 is similar in manufactyuring and appearance.
Does anyone have the JB Wood Rimfire disassembly book? It lists how the breach bolt comes apart for the model 190.
Dick357mag
I finally located a firing pin for the Winchester Model 150 rimfire lever action.
The problem is getting the old pin out of the bolt? I removed the firing pin stop-pin, which allows the firing pin to slide back, but not out of the bolt.
When the firing pin is moved back, I can visually see the firing pin ball and spring. The bolt sees to be a 2 piece, but does anyone know how it splits or comes apart?
Any help would be appreciated.
Update>>>Apparently the Winchester Model 190 is similar in manufactyuring and appearance.
Does anyone have the JB Wood Rimfire disassembly book? It lists how the breach bolt comes apart for the model 190.
Dick357mag
Last edited:
