Winchester single shot shotgun ?

[Leavenworth]

Hi Again Fellas

Have another shotgun question . I have a Winchester single shot 12 gauge model 37 A made in Canada .First firearm I bought. I have a part that is broken , it's the plastic part that sits behind the wood fore stock where the shotgun breaks open . Can you buy those ? Also the fore stock might need to be adjusted as it came off once when firing the gun. Maybe the screw that is in the spring on the underside of the wood fore stock does this ? Any help would be appreciated !

Thanks
Leavenworth

 

[1963beretta]

There is a guy on here that sells metal replacements. Its the same part used on Cooey 84's. If your forearm easily comes off, its likely the forearm latch thats the issue

 

[Hovenator]

I belive he has them for sale in the EE. I have a Cooey 84 which has the metal piece. Great old gun.

 

[Leavenworth]

Thanks Fellas

Do you know his name ?
Leavenworth

 

[willisjake]

http://www.canadiangunnutz.com/foru...OEY-Winchester-Forearm-Spacer?highlight=cooey

 

[Leavenworth]

I belive he has them for sale in the EE. I have a Cooey 84 which has the metal piece. Great old gun.

Thank You !
Leavenworth

 

[dcpipal]

Hi, i am also trying to find out if the forearm spacer are still available. I hope someone could pm me the guy's name or contact info.
Thank you.

 

[gunsaholic]

Hi, i am also trying to find out if the forearm spacer are still available. I hope someone could pm me the guy's name or contact info.
Thank you.

Just go 2 posts up from yours and click on that link then send the fellow a private message.

 

[dcpipal]

Thank you gunsaholic. Unfortunately i do not have the permission to access the page yet. I hope that the fellow can read this post.

 

[88 man]

His cgn name is Winchester and a very good friend of mine.He's got a few of the parts your looking for yet dcpipal

 

[dcpipal]

Thanks 88man. Do you have his email addy or contact info?

 

[Leavenworth]

Cleaning up some old threads on CGN so here goes .Got the metal part a long time ago and have installed it but one of the two small screws just keeps turning in it's hole . What would you do to fix this ? Longer screw ? Or use some sort of epoxy to keep the same screw in there ? Also what shot shells can I shoot out of this if not lead ?
Thanks !
Leavenworth

 

[abramh]

Wood glue and jam it with toothpicks. Cut them offwhen it’s dry and put the screw in.

 

[Leavenworth]

Wood glue and jam it with toothpicks. Cut them offwhen it’s dry and put the screw in.

That seems simple enough . Thanks abramh
Leavenworth