Winchester whitebox, and UMC 9mm reloadable?

Brass

Almost any boxer primed brass is fine to reload. Some is very stiff and some is very soft. Remington and winchester usa both work very well and seem to load over and over again.
Carry on!
 
Well I figure it is, at least in the calibers I have tried. By the time you have bought components to reload it well you ain't too far off the price of a box, especially if your time is worth something. Then again if you enjoy the reloading or want to try some different bullets go for it. I like the reloading but the savings allow you to shoot more:)
The savings are greater if you are creating a premium load so to speak. For high volume blasting away you can't beat economy factory/milsurp ammo
 
that's only with the 9mm - if you switch to something that is a high buck /box, you really notice it- like 45 colt and 44 mag go for about 30-35 bucks a box, reloading will get you the same performance for about half the cost- eso in 45 colt- the brass alone is much expensive- 9mm goes for about 10 bucks/50 , which just about breaks even, plus you get a jacketed bullet, which means you don't have to scrub the heck out of the bore
 
Like pistol, depends on the round. You can get cheap milsurp in 7.62X39 or 7.62x 51/.308 , or .223 which is hard to beat price/costwise. The neat part of reloading rifle calibers is to find a load that is super accurate in your rifle, loading light loads for recoil sensitive people, etc.For equivalent quality bullets you should be able to come in at 40% to 50% of factory ammo prices plus have a super accurate load.

most reloaders of rifle ammo spend the same amount of $$ but shoot twice as much as someone who burns factory ammo. plus there's something about cooking up your own recipe...
 
They both are reloadable. The Wincester Winclean is cleaner than Wincester White Box and Remington UMC. There is a Winclean logo on the box. However. my CZ75 shoots better with Remington and I don't know why.
 
t-star said:
that's only with the 9mm - if you switch to something that is a high buck /box, you really notice it- like 45 colt and 44 mag go for about 30-35 bucks a box, reloading will get you the same performance for about half the cost- eso in 45 colt- the brass alone is much expensive- 9mm goes for about 10 bucks/50 , which just about breaks even, plus you get a jacketed bullet, which means you don't have to scrub the heck out of the bore
Your cost $10/50 = $200/1000 = $2000/10,000 + tax?

My reloads cost $105/1000 = $1050/10,000 tax in.(one year of shooting for me)

My savings = $950/yr. The Dillon 550 + dies, tools, etc was covered in the first year.

I dunno.........I think it's worth reloading for 9mm.
 
around here, 9mm is usually $12-14 a box. I reload.
1lb of titegroup = $29 ( 7000gr)
1000 primers = $30
1000 9mm FMJ = $80

$139 for the first batch, then I still have enough powder for another 750 rounds.

if you take my cost ( $139) and divide it by the store price $139/$14 = 10
10 boxes of 50rnds= 500.

well, I can make 1000 rounds for that price. it cost you half the price to reload.
$139/1000 = $6.95 a box of 50.
your next reload ( remember you still have 750 rounds worth of powder left over) ... ( bulets $80 + primers $30 + $1 for remaining 250 rounds) =$111 for your second btch of 1000 rounds.
this batch works out to be $5.55 per 50 rounds.

so you can spend some time and get 2000 rounds for $250 by making them, or you can buy them at the store and pay $560

$250 or $560?... which would you rather pay?

cheers,
 
Back
Top Bottom