"Winterizing" Firearms

Everyone losing their minds over using a firearm in the cold, it’s not that difficult, read from the start of this thread.

Personally I think too much lube and oils get used, when they aren’t required.

Dry teflon lube, G96, wax…..
 
Is a special version of oil required for winter maintenance?
It's obvious you're a newbie to this, so don't take this as a negative.

The first thing to take into account is whether you intend to hunt in cold conditions.

Depending on where you live, that's a very valid question, because some Provinces/Territories open their seasons in mid August, in some regions.

Other Provinces don't open their hunting seasons until November.

Every answer you get here, other than a few, will be different and valid for that person's needs.

Those needs may not mirror your own.

The biggest issue you can get with winter lubricants and firearms is USING TOO MUCH LUBE, in the wrong places.

Many folks hunt without any lube at all on the working parts of their rifles. They've learned, either from hard experience or from a good mentor no lube for a few shots will not cause damage to the inner mating surfaces, and will not attract detritus or parts to malfunction because tacky or frozen lube has gummed up proper operation.

Graphite is OK, especially for semi auto firearms, or the full auto firearms used by the military. It works, but it's messy.

The next thing is, why do you want to lubricate the firearm? Are you trying to prevent rust or make sure everything functions smoothly?

How much lube do you require? By that I mean quantity on hand.

Most lubes sold as firearms lubes are just off the shelf products, packaged in smaller containers at horrendous prices. This isn't always a bad thing, because people with only one or a few firearms don't need much, and if storage is an issue, the smaller container may be worthwhile.

Some folks know a lot about lubricants, because of work related requirements, most just listen to the "counter jockey" at their LGS or Big Box store, who doesn't know any more than you do.

I've been at this for 60+ years, used most operating types of firearms under all sorts of environmental conditions, and one of the first things I've learned the hard way is that lubricants create more issues than they fix in most cases.

There are some very light, silicone based spray lubes available off the shelf at most Big Box stores. They cost about a quarter as much as a similar or even identical product that comes in a firearms labeled container.

A quick spray on the back of the locking lugs is all you need for the working components.

Trigger assemblies should be dry.

Bores should be dry.

The rest of the rifle should be dry.

You don't want lube in the bedding of your rifle it will cause accuracy issues.

Keep your rifle clean, and minimally lubed during hunting seasons, hot, cold, dry, or wet.
 
Imo if you're going to get your gun that cold during the day. Don't bring it in at night. Leave it in the cold if possible to avoid frost and condensation. I clean my bolts with brake clean and don't lube them. Never had in issue.
 
Growing up in the NWT, I have seen first hand the effects of over lubricated firearms mixed with cold temperatures. The only thing that I worry about is the firing pin. I want to ensure that it is thoroughly degreased and then lubricated with powdered graphite. It's a 30 second job on a Winchester or Mauser, thanks to their bolt design. It takes a little more frigging around with a Model 700 and other push feed designs, but the juice is worth the squeeze.
 
Personally, I'm not overly particular on the type of lube used for (extreme) cold weather.

Graphite products exist (powder, spray, grease etc versions) but I find them kind of old tech. G96 is always a reliable option but there are others I've used with good success including Shooter's Choice All-Weather grease, Lucas Oil Extreme, etc etc.

Condensation and icing/freezing in voids can be more of an issue than metal-to-metal stiction problems associated with a particular lube.
 
I have not tried g96 but I'm a fan of breakclean/running the thing dry without any lube and leaving her outside all the time in the dry winter......btw test your velocities in real cold weather and you my be very surprised at the low numbers you get with various powders....
 
I have never had a problem with a lubed gun.

My shotgun that I have carried last few years chasing rabbits I have just been using paste wax on the outside both wood a metal.
 
another vote for G96...... Have done a fair bit of winter weather hunting and hunting in really wet conditions.
G96 and also CLP are probably the two i use the most year round but definately G96 for cold weather.
bolt guns or semi auto although I do have a synthetic winter grease I used to use on the m14 and sks type rifles, just can't remember what it's called at the moment.
 
The problem with zero lube sometimes is moisture gets in places it shouldn't, freezes and then things stop working.

As the trigger is generally well protected, these areas are left dry.

My go to lube for years has been Fluid Film.

Bolts and all moving internals, get sonic cleaned, disassembled, and sprayed, left to soak a bit, and wiped down. The remaining residue provides moisture protection and will not be hindered by any weather i would care to be out in (down to -40C).
 
Back
Top Bottom