Wondering what these Warne rings would fit. (Solved thanks for the help)

[ljones]

I have a set of Warne 1" scope rings. But not sure what model they would fit. The tab on the bottom has me confused. They are a dovetail base for like a CZ rifle, but can't find another like them to compare them to to know what they would fit. Would any of the guru's here know what they would fit? Would like to sell them on the EE but need to know what brand and model they would fit. Any help would be appreciated.

 

[rgv]

Sako

 

[Keithjohn]

Have you somthing to measure the slot at each end of each mount . I have tikka,s and Sako,s I can measure . If they fit an old tikka I'll buy them from you

 

[ljones]

Have you somthing to measure the slot at each end of each mount . I have tikka,s and Sako,s I can measure . If they fit an old tikka I'll buy them from you

Not sure what exactly you want me to measure. I have digital calipers and can measure, but not sure what you mean by measuring the slot. Do you mean the inside width at the top of the dovetail front and back? If so with the screws tight it is 16mm.

 

[Keithjohn]

16mm on all ends ? It looks like a taper and front and back are different . If so should be 4 measurements

 

[ljones]

Don't think it is tapered. The one has the tab so can't get a measurement on one end but the other is the same front and back.

 

[Keithjohn]

I would say it's for the tikka models. Sakes are tapered . My tikka m658 has a 16mm rail with a spot for the recoil lug

 

[ljones]

Thanks for the help guys. Rings has been claimed and are heading to a new home. Cheers