Wow....$99 pistol....Norinco M213

Status
Not open for further replies.
Hookturn said:
My sights were about 10 inches right and 5 inches low at 25m. Once I figured out the sights if I took my time my groups were about the size of a pie plate but that could just be me.
Click to expand...

correction_chart.gif


Probably just you (tightening grip while pulling trigger) the triggers on these take a bit of time to get used to. :D

Hookturn said:
Don't hold too high on the grip or the hammer can pinch you hand.
Click to expand...

Good advice, and yes my first time out I got the tokarev pinch. :D

Sorry for the large pic, it's not mine so I can't reduce it without some effort, and I'm too lazy right now. :D
 
Last edited:
I have a problem accessing status of my order on the web, keeps kicking me out to log in page, hmmm, anyone else has that kind of issue?
What if hacked? Hacker would have bunch of "good info" to work with :S
 
edyshok said:
I have a problem accessing status of my order on the web, keeps kicking me out to log in page, hmmm, anyone else has that kind of issue?
What if hacked? Hacker would have bunch of "good info" to work with :S
Click to expand...

Thats not how it works, dont worry :D

Have you made sure that cookies are enabled, or that you haven't blocked cookies from the CanAm website?
 
The Cocker said:
Spare mags can be had from Marstar, also Lever arms in Vancouver should have them. I think you can just use the 7.62 mags anyway.
Click to expand...

I learned recently that the M213 has a unique mag that is narrower than the TT-33 mag, and other Norinco Tokarevs, even those designed to shoot 9mm.

I'm not aware of any sources for mags for the M213 in Canada at present.
 
Andy said:
I learned recently that the M213 has a unique mag that is narrower than the TT-33 mag, and other Norinco Tokarevs, even those designed to shoot 9mm.

I'm not aware of any sources for mags for the M213 in Canada at present.
Click to expand...

this is because of a spacer put into the magwell on the m213. you can see it in the previously posted pictures. if you remove it using a 7.62x25mm magazine should work just fine
 
benmacksh said:
this is because of a spacer put into the magwell on the m213. you can see it in the previously posted pictures. if you remove it using a 7.62x25mm magazine should work just fine
Click to expand...

Anyone know how this spacer is mounted in the mag well then?

Can it be removed easily?
 
benmacksh said:
this is because of a spacer put into the magwell on the m213. you can see it in the previously posted pictures. if you remove it using a 7.62x25mm magazine should work just fine
Click to expand...

I would say you'd then use the wider mag, but the one modified for the shorter 9mm, with the spacer built into the mag. Those were around last year and might still be available.
 
If it shoots low, file off some of the front site, and touch upwith cold blue.

If it shoots left or right, drift the rear sight in the direction you want the group to go. Us a brass droft so you don't damge the rear sight.
 
GANDERITE said:
If it shoots low, file off some of the front site, and touch upwith cold blue.

If it shoots left or right, drift the rear sight in the direction you want the group to go. Us a brass droft so you don't damge the rear sight.
Click to expand...

Before you file anything off the front site make sure the problem isn't your shooting technique. Try firing it from a bench off a sandbag to confirm point of aim.
 
Status
Not open for further replies.
Back
Top Bottom