Wow....$99 pistol....Norinco M213

Status
Not open for further replies.
Just got to shoot mine yesterday and like it very much. My first 3 shots went into a 2 litre milk jug full of water at 20 paces,surprised the crap out of me. Did have some ejection problems though as I went along. I believe I read something about a fix for that back aways in this thread,will try to find it. Anyways two thumbs up from me.
 
OK, got the grips installed. Trimmed the bottom off flush with a dremel. Enlarged the hole around the mag release.

The bottom blocks do not go up far enough to drop into a locking position. They sit on top of the frame and bulge the grips a bit. Anyone have this problem? Find a fix?
 
Ganderite said:
OK, got the grips installed. Trimmed the bottom off flush with a dremel. Enlarged the hole around the mag release.

The bottom blocks do not go up far enough to drop into a locking position. They sit on top of the frame and bulge the grips a bit. Anyone have this problem? Find a fix?
Click to expand...

I've noticed the bottom blocks sit kind of goofy....I was waiting for someone else to mention it. I need to dremel out the part that the mag catches on and I'll just leave the blocks if it shoots fine.
 
Ganderite said:
OK, got the grips installed. Trimmed the bottom off flush with a dremel. Enlarged the hole around the mag release.

The bottom blocks do not go up far enough to drop into a locking position. They sit on top of the frame and bulge the grips a bit. Anyone have this problem? Find a fix?
Click to expand...

I just dremeled them down now the grip sits nice and it doesn't move.
 
NAA said:
.... all sold out.

Coming to the EE soon, used, and at over inflated prices.... ;) :p

2007-10-27_091302_1aCoffee.gif

NAA.
Click to expand...

Crap I missed out. :(
 
Too bAd...I just received the first of 5 (that is : FIVE) that I bought to seduce the family into getting their RPAL - first come, first gets a free gun!

I guess I broke the bank!

Ted :)
 
Anyone have pictures of the grips on a M213 that are trimmed to size?

There is an awful lot of grip that needs to be taken off for it to be flush to the bottom of the magazine.

I've held off mine as it's not exactly a reversible operation.
 
Ok here it is with a trimmed down grip. I used a dremal tool with a stone wheel to smooth down the edges after I cut it with a razor and and I used it to widen the mag release.
100_0281.jpg

100_0277.jpg
 
I'll post a few pictures of the cut job I did on mine last night, just cut the front part so the mag fits in and comes out.

Took them out shooting today for the most part they worked great I never had any issues when shooting but it did jam on my friend, I think it's just the slide needs a little sanding so it's smoth. Very happy with my $100 guns!!!
 
I got to shoot mine today, it was raining out and the grips were slippery BUT FUN AS HELL! Well worth their price, only a fool would of not gotten one :)
 
Status
Not open for further replies.
Back
Top Bottom