XCR-L From 5.56 to 7.62

[Skeletor68]

Stupid Question about changing my (Non-Restricted) XCR-L from a 5.56x45 to a 7.62x39, What parts do I need to get?

 

[Deaus]

All you need is a Barrel, Bolt, Firing Pin, and Magazines. If you go on the Robinson Arms website they have a little breakdown of what you would need. It is about 1/3 down the page.

https://robinsonarmament.com/faq/

 

[Skeletor68]

All you need is a Barrel, Bolt, Firing Pin, and Magazines. If you go on the Robinson Arms website they have a little breakdown of what you would need. It is about 1/3 down the page.

https://robinsonarmament.com/faq/

Thank you very much!

 

[b_w.]

Why not just buy a surplus rifle if you want to shoot 762*39?

 

[sikwhiskey]

All you need is a Barrel, Bolt, Firing Pin, and Magazines. If you go on the Robinson Arms website they have a little breakdown of what you would need. It is about 1/3 down the page.

https://robinsonarmament.com/faq/

I have never needed to change the firing pin, just barrel and bolt. If you install the 7.62 brass deflector , leave it on, works better for 556.

 

[VancouverS4]

you can find the parts on the EE sometimes or just email wolverine they will send you a parts list with current pricing.

 

[wrenchbender4]

They have a multi caliber brass deflector. For 5$you never need to change it again

 

[Skeletor68]

Right on guys, thank you.

 

[hbean]

Check Wolverine's website, they do carry complete conversion kits