An excellent idea, give me time to work on it and I will put something together. I will also include those little items that easily get lost. The one issue that I see is lack of maintance and poor lubrication, spare parts do not sove that. I have heard no reports of op rod failure (I do have a bad memory) this is certainly not a regular part to fail. We do have a fairly good inventry of parts.
What is the max cost you would pay for such a kit? Extra buffers I can see but two spare firing pins? Do you want a cheap basic kit, just a few parts and or a delux kit which could be expensive?
Here is a list and picture I found on an XCR forum for suggested spare parts, the only thing that might be different deprnds on what type of firing pin you have.
Firing pin
Firing pin spring
Extractor cone
Extractor spring
Firing pin roll pin
BHO Shaft
BHO pin
C Clip
Ejector
Ejector Screws (2)
Hammer Axis pin
Cotter pin
Hammer spring
Ejector washers (2)
Main pin
Recoil buffer
Trigger axis pin
Trigger spring
![]()
This is what we are proposing as an XCR Spare parts kit. In addition we carry in stock spare barrels, bolt assemblies etc which could always be added to a kit, comments please.
XCR Spare parts Kit
1 Ejector
2 Ejector bolts
2 Ejector lock washers
1 Extractor
1 Extractor spring
1 Extractor detent
3 Main pin clips
1 Hammer axis pin
1 hammer axis pin clip
1 Bolt catch (old or new Style)
1 Bolt catch spring
1 Bolt catch foot
1 Bolt catch foot bolt
1 Trigger spring
1 Hammer spring
1 Disconnector spring
1 Firing pin
1 Firing pin spring
1 Firing pin coil pin
5 Recoil buffers
1 Case deflector (Caliber specific)
1 Case deflector bolt
1 Gas Valve (Caliber specific)
2 Barrel retainer bolts
1 Recoil spring
X3 - will this be compatible with the XCR-M?